Configuring the Wireless Mobile Router
Wireless
To configure the Wireless Mobile Router as a wireless access point for wireless clients (either stationary or roaming), all you need to do is define the radio channel, the Service Set Identifier (SSID), and encryption options (Figure 43 - Note: The figures not numbered on the following page are provided to show better details of the fields on this screen).
Channel and SSID
You must specify a common radio channel and SSID (Service Set ID) to be used by the Wireless Mobile Router and all of your wireless clients. Be sure you configure all of your clients to the same values.
SSID: This should be set to the same value as other wireless devices in
the network. (Default: apc)
Note: The SSID is case sensitive and can consist of up to 32 alphanumeric characters.
Figure 43. Channel and SSID Setup Screen
48