Advanced Setup
Point-to-Point Tunneling Protocol (PPTP)
Enter the PPTP user ID, Password, Host Name and Service IP address, and then the assigned IP address and subnet mask (usually supplied by your ISP), Figure 38.
The MTU (Maximum Transmission Unit) governs the maximum size of the data packets. Leave this on the default value (1460) unless you have a particular reason to change it.
Enter a maximum Idle Time Out (in minutes) to define a maximum period of time for which the PPTP connection is maintained during inactivity. If the connection is inactive for longer than the Maximum Idle Time, it will be dropped.
Enable the
Figure 38. Point-to-Point Tunneling
Protocol (PPTP) Setup Screen
43