Advanced Setup
WAN
Specify the WAN connection type provided by your Internet Service Provider, then click More Configuration to enter detailed configuration parameters for the selected connection type.
Dynamic IP
When setting up a Dynamic IP address (Figure 36), the Host Name is optional, but may be required by some ISPs. The default MAC address is set to the WAN’s physical interface on the Wireless Mobile Router. Use this address when registering for internet service, and do not change it unless required by the ISP. If the ISP used the MAC address of an ethernet card as an identifier when first setting up your broadband account, only connect the PC with the registered MAC address to the Wireless Mobile Router and click the Clone MAC Address button. This will replace the current Wireless Mobile Router MAC address with the already registered Ethernet card MAC address.
Figure 36. Dynamic IP Setup Screen
41