American Power Conversion WMR1000B user manual Configuring Your Computer in Windows, Reboot the PC

Configuring Client TCP/IP

Configuring Your Computer in Windows 2000

DHCP IP Configuration

1.Access Network settings by clicking Start/Settings/Control Panel.

2.Double-click the Network and Dial-up Connections icon.

3.Double-click the Local Area Connection icon for the ethernet adapter connected to the Wireless Mobile Router. When the Status dialog box screen (Figure 16), click the Properties button.

4.In the Local Area Connection Properties box, verify the box next to Internet Protocol (TCP/IP) is checked. Highlight Internet Protocol (TCP/IP), and click the Properties button.

Figure 16. Local Area

Connection 1 Status Screen

5.Select Obtain an IP address automatically to configure your computer for DHCP. Click the OK button to save this change and close the Properties screen.

6.Click the OK button again to save these new changes.

7.Reboot the PC.

8.To obtain new network settings see “Obtain IP Settings from Your Wireless Mobile Router”.

20