DI-304/DI-304M ISDN Remote Router
Each
Common Settings
♦Profile Name – Specify a name for the remote network.
♦Enable this profile – Check here to activate this profile.
♦Call Direction – Specify the allowed call direction for this profile.
◊Both - allow access of both outgoing and incoming calls.
◊
◊
♦Idle Timeout – Default setting is 300 seconds. When a connection of a profile has been idled longer than the time limit, the router will drop the connection.
Dial-Out Settings
♦Username – Specify a username for authentication by the remote router.
♦Password – Specify a password for authentication by the remote router.
♦Dial Number – Specify the destination ISDN number for dialup.
♦Scheduler
♦Link Type – Indicate the
◊Disable: Deactivate the
◊64kbps: Specify the outgoing connection speed is restricted to 64kbps (one
◊128k bps: Specify the outgoing connection speed is 128kbps (two
◊BOD: Specify the link type to be dynamic bandwidth control
♦PPP Authentication – Specify the authentication method. Normally set to PAP/CHAP for the widest compatibility.
♦VJ Compression – VJ Compression means TCP/IP protocol header compression. Normally set to "On" to improve
♦Callback Function (CBCP) – The callback function is implemented by the CBCP protocol that is one of the PPP protocol suite.
◊Require Remote to Callback - Inactive by default. When active, the router exchanges connection information with the remote router and requires the remote router to call back to make a connection.
◊Provide ISDN Number to Remote - In some cases, the remote router requires the ISDN number for calling back. Check here to allow the local router to send the ISDN number to the remote router. The remote router owner will be charged the connection fee by the telecom.
Dial-In Settings
♦Username – Specify an username to authenticate the
♦Password – Specify a password to authenticate the
46