D-Link DIV-140 manual Media Configuration

Media Configuration

RTP Port Range: Configure the port range to be used for RTP streaming. This range should be larger than twice the maximum number of simultaneous calls as each call needs two ports (RTP + RTCP). Range: 1024 to 65535. Default: 6000 to 10000.

QoS: Parameters for various Quality-of-Service mechanisms can be set in this section. These are used to prioritize the RTP packets on the network.

ToS: This field specifies the Type-of-Service value that is used for

RTP packets. Recommended value is 160. Range: 00 to 255.

Default: 160.

VLAN ID: This feature will be supported in future releases.

User Priority: This feature will be supported in future releases.

D-Link DIV-140 User Guide 20