For example, the feature key sequence to initiate call hold feature is *111. If character termination is enabled to # then you can dial *111# for the same.
Character: Enter the character to use for termination. Range: 0 to 9, * or #. Default: #
Default Route: Here you can configure how calls should be routed.
Route all calls to Enable this if all calls including calls to local FXO ports should be routed to the VoIP server. Default: Enable. VoIP Server: Note: If this field is enabled, then the calls to local FXO ports will fail if the VoIP server is not available.
| 16 |