D-Link manual Configuring the DI-604, Start-up and Log, For example http//192.168.0.1

Page 10

Configuring the DI-604

The DI-604 provides an embedded Web-based management utility making it operating system independent. You can configure your DI-604 through the Netscape Communicator or Internet Explorer browser in MS Windows, Macintosh, Linux or UNIX based platforms. All that is needed is a web browser such as Internet Explorer or Netscape Navigator version 4 and higher with Java Script enabled.

Start-up and Log in

Activate your web browser and type in the IP address of the DI-604 into the Location (for Netscape) or Address (for IE) field and press “Enter.” The default IP address of the DI-604 is

192.168.0.1

For example: http://192.168.0.1

After the connection is established, the logon screen will pop up.

To log in as an administrator, enter the username of “admin” and the password (there are no default password, leave it blank). Click the OK button. If the password is correct, the web-management interface will appear.

-10-

Image 10

Contents Link Express EtherNetworkTM DI-604 Contents Features and Benefits IntroductionFilter Scheduling Content FilteringTechnology Introduction Network Address TranslationIntroduction to Firewalls Introduction to Local Area NetworkingPackage Contents Power WAN LAN Hardware DescriptionReset Reset PowerNetwork Settings Installation LocationGetting Started Start-up and Log Configuring the DI-604192.168.0.1 For example http//192.168.0.1 Using the Configuration Wizard Dynamic IP Address Static IP Address PPPoEPage Using the Configuration Menu Setup WizardHome WAN Dynamic IP Address Home WAN Static IP Address Home WAN Pppoe Home LAN Home Dhcp Advanced Virtual Server Name Web Server Public PortName FTP Server Advanced ApplicationsPage Filters Advanced Filters IP FiltersIP Filters Advanced Filters MAC Filters Advanced Filters URL Blocking Advanced Filters Domain Blocking Advanced Filters Firewall Advanced DMZ Admin Tools AdminRemote Management Tools Time TimeSystem Settings Tools SystemFirmware Upgrade Tools FirmwarePing Test Tools MiscMiscellaneous Items Restart DeviceBlock WAN Ping VPN Pass-ThroughTools VCT Status Device Information WAN Status LOG Log SettingsLog Status Stats Traffic StatisticsTroubleshooting Winipcfg for Windows 95/98 Choose the IP Address tab. Select Obtain an IP automaticallyIpconfig for Windows 2000/NT/XP Control Panel Network ConnectionsHighlight Internet Protocol TCP/IP Click Properties 192 Using the Network Setup Wizard in Windows XP Networking BasicsNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Networking Basics Right-click on My Computer Select Properties and click Windows XPComputer Name Tab System Properties window Name Select Workgroup and enter the name of the Workgroup Type Command Checking the IP Address in Windows XP/2000Windows 98/ME users winipcfg at the prompt. Address Double-click on Control PanelAssigning a Static IP Address You must enter the IP Address of the Default Gateway Adding and Sharing Printers in Windows XP Printers and Faxes Click on Add a printer Select Local printer attached to this computer Select Use the following portNetworking Basics Adding a local printer Adding a local printer Go to Start Printers and Faxes Printer and FaxesAdd a Printer PrinterSelect Browse for a printer Printers and Faxes Network Setup Wizard on all the network computersYou have completed adding the printer Sharing an LPR printer Local printer…Select Create a new port Enter the Printer IP Address and the Port Name, as shownClick Settings Click Have Disk Select Keep existing driverClick Next Select Yes, to print a test VPN Pass Through / Multi-Sessions Technical SpecificationsMedia Access Control Device ManagementDimensions Power InputSafety & Emissions WeightTechnical Support Warranty What You Must Do For Warranty Service Trademarks FCC Statement

Related manuals

Manual 49 pages 3.13 Kb