D-Link DI-604 manual Tools Time

Page 32

recommended that you set the IP address to * (star), because this allows any Internet IP address to access the Broadband Router, which could result in a loss of security for your network. If you elect to enable Remote Management, enter the IP Address of your remote location.

Port: The port number used to access the Broadband Router. (Select from the pull-down menu.)

Example: http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the Broadband Router and 8080 is the port used for the Web-Management interface.

TOOLS > TIME

Time

The system time is the time used by the DI-604 for scheduling services. You can manually set the time or connect to a NTP (Network Time Protocol) server. If an NTP server is set, you will only need to set the time zone. If you manually set the time, you may also set Daylight Saving dates and the system time will automatically adjust on those dates.

-32-

Image 32

Contents Link Express EtherNetworkTM DI-604 Contents Features and Benefits IntroductionContent Filtering Technology IntroductionFilter Scheduling Network Address TranslationIntroduction to Firewalls Introduction to Local Area NetworkingPackage Contents Power WAN LAN Hardware DescriptionReset Reset PowerGetting Started Installation LocationNetwork Settings 192.168.0.1 For example http//192.168.0.1 Configuring the DI-604Start-up and Log Using the Configuration Wizard Dynamic IP Address Static IP Address PPPoEPage Using the Configuration Menu Setup WizardHome WAN Dynamic IP Address Home WAN Static IP Address Home WAN Pppoe Home LAN Home Dhcp Advanced Virtual Server Name Web Server Public PortName FTP Server Advanced ApplicationsPage IP Filters Advanced Filters IP FiltersFilters Advanced Filters MAC Filters Advanced Filters URL Blocking Advanced Filters Domain Blocking Advanced Filters Firewall Advanced DMZ Remote Management Tools AdminAdmin Tools Time TimeSystem Settings Tools SystemFirmware Upgrade Tools FirmwareTools Misc Miscellaneous ItemsPing Test Restart DeviceBlock WAN Ping VPN Pass-ThroughTools VCT Status Device Information WAN Log Log SettingsStatus LOG Status Stats Traffic StatisticsTroubleshooting Winipcfg for Windows 95/98 Choose the IP Address tab. Select Obtain an IP automaticallyIpconfig for Windows 2000/NT/XP Control Panel Network ConnectionsHighlight Internet Protocol TCP/IP Click Properties 192 Using the Network Setup Wizard in Windows XP Networking BasicsNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Networking Basics Computer Name Tab System Properties window Windows XPRight-click on My Computer Select Properties and click Name Select Workgroup and enter the name of the Workgroup Type Command Checking the IP Address in Windows XP/2000Windows 98/ME users winipcfg at the prompt. Address Double-click on Control PanelAssigning a Static IP Address You must enter the IP Address of the Default Gateway Adding and Sharing Printers in Windows XP Printers and Faxes Click on Add a printer Select Local printer attached to this computer Select Use the following portNetworking Basics Adding a local printer Adding a local printer Go to Start Printers and Faxes Printer and FaxesAdd a Printer PrinterSelect Browse for a printer You have completed adding the printer Network Setup Wizard on all the network computersPrinters and Faxes Sharing an LPR printer Local printer…Select Create a new port Enter the Printer IP Address and the Port Name, as shownClick Settings Click Have Disk Select Keep existing driverClick Next Select Yes, to print a test Technical Specifications Media Access ControlVPN Pass Through / Multi-Sessions Device ManagementPower Input Safety & EmissionsDimensions WeightTechnical Support Warranty What You Must Do For Warranty Service Trademarks FCC Statement

Related manuals

Manual 49 pages 3.13 Kb