D-Link DI-604 manual Control Panel, Network Connections

Page 45

Assigning a Static IP Address

Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses.

If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address, please follow these instructions:

Go to START

Double-click on

Control Panel

Double-click on

Network

Connections

-45-

Image 45

Contents Link Express EtherNetworkTM DI-604 Contents Introduction Features and BenefitsTechnology Introduction Content FilteringFilter Scheduling Network Address TranslationIntroduction to Local Area Networking Introduction to FirewallsPackage Contents Hardware Description Power WAN LANReset Power ResetInstallation Location Network SettingsGetting Started Configuring the DI-604 Start-up and Log192.168.0.1 For example http//192.168.0.1 Using the Configuration Wizard Dynamic IP Address PPPoE Static IP AddressPage Setup Wizard Using the Configuration MenuHome WAN Dynamic IP Address Home WAN Static IP Address Home WAN Pppoe Home LAN Home Dhcp Advanced Virtual Server Public Port Name Web ServerAdvanced Applications Name FTP ServerPage Advanced Filters IP Filters FiltersIP Filters Advanced Filters MAC Filters Advanced Filters URL Blocking Advanced Filters Domain Blocking Advanced Filters Firewall Advanced DMZ Tools Admin AdminRemote Management Time Tools TimeTools System System SettingsTools Firmware Firmware UpgradeMiscellaneous Items Tools MiscPing Test Restart DeviceVPN Pass-Through Block WAN PingTools VCT Status Device Information WAN Log Settings Status LOGLog Traffic Statistics Status StatsTroubleshooting Choose the IP Address tab. Select Obtain an IP automatically Winipcfg for Windows 95/98Ipconfig for Windows 2000/NT/XP Network Connections Control PanelHighlight Internet Protocol TCP/IP Click Properties 192 Networking Basics Using the Network Setup Wizard in Windows XPNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Networking Basics Windows XP Right-click on My Computer Select Properties and clickComputer Name Tab System Properties window Name Select Workgroup and enter the name of the Workgroup Checking the IP Address in Windows XP/2000 Type CommandDouble-click on Control Panel Windows 98/ME users winipcfg at the prompt. AddressAssigning a Static IP Address You must enter the IP Address of the Default Gateway Adding and Sharing Printers in Windows XP Printers and Faxes Click on Add a printer Select Use the following port Select Local printer attached to this computerNetworking Basics Adding a local printer Adding a local printer Printer and Faxes Go to Start Printers and FaxesPrinter Add a PrinterSelect Browse for a printer Network Setup Wizard on all the network computers Printers and FaxesYou have completed adding the printer Local printer… Sharing an LPR printerEnter the Printer IP Address and the Port Name, as shown Select Create a new portClick Settings Select Keep existing driver Click Have DiskClick Next Select Yes, to print a test Media Access Control Technical SpecificationsVPN Pass Through / Multi-Sessions Device ManagementSafety & Emissions Power InputDimensions WeightTechnical Support Warranty What You Must Do For Warranty Service Trademarks FCC Statement

Related manuals

Manual 49 pages 3.13 Kb