D-Link DI-604 manual 192

Page 47

Select Use the following IP address in the Internet Protocol (TCP/IP) Properties window.

Input your IP address and subnet mask. (The IP Addresses on your network must be within the same range. For example, if one computer has an IP Address of 192.168.0.2, the other computers should have IP Addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network.)

Input your DNS server addresses.

The DNS server information will be provided by your ISP (Internet Service Provider.)

192. 168 . 0.

192. 168 . 0.

Click OK

You have completed the assignment of a Static IP Address. (You do not need to assign a Static IP Address if you have a DHCP-capable Gateway/Router.)

-47-

Image 47

Contents Link Express EtherNetworkTM DI-604 Contents Introduction Features and BenefitsNetwork Address Translation Content FilteringTechnology Introduction Filter SchedulingIntroduction to Local Area Networking Introduction to FirewallsPackage Contents Hardware Description Power WAN LANReset Power ResetGetting Started Installation LocationNetwork Settings 192.168.0.1 For example http//192.168.0.1 Configuring the DI-604Start-up and Log Using the Configuration Wizard Dynamic IP Address PPPoE Static IP AddressPage Setup Wizard Using the Configuration MenuHome WAN Dynamic IP Address Home WAN Static IP Address Home WAN Pppoe Home LAN Home Dhcp Advanced Virtual Server Public Port Name Web ServerAdvanced Applications Name FTP ServerPage IP Filters Advanced Filters IP FiltersFilters Advanced Filters MAC Filters Advanced Filters URL Blocking Advanced Filters Domain Blocking Advanced Filters Firewall Advanced DMZ Remote Management Tools AdminAdmin Time Tools TimeTools System System SettingsTools Firmware Firmware UpgradeRestart Device Tools MiscMiscellaneous Items Ping TestVPN Pass-Through Block WAN PingTools VCT Status Device Information WAN Log Log SettingsStatus LOG Traffic Statistics Status StatsTroubleshooting Choose the IP Address tab. Select Obtain an IP automatically Winipcfg for Windows 95/98Ipconfig for Windows 2000/NT/XP Network Connections Control PanelHighlight Internet Protocol TCP/IP Click Properties 192 Networking Basics Using the Network Setup Wizard in Windows XPNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Networking Basics Computer Name Tab System Properties window Windows XPRight-click on My Computer Select Properties and click Name Select Workgroup and enter the name of the Workgroup Checking the IP Address in Windows XP/2000 Type CommandDouble-click on Control Panel Windows 98/ME users winipcfg at the prompt. AddressAssigning a Static IP Address You must enter the IP Address of the Default Gateway Adding and Sharing Printers in Windows XP Printers and Faxes Click on Add a printer Select Use the following port Select Local printer attached to this computerNetworking Basics Adding a local printer Adding a local printer Printer and Faxes Go to Start Printers and FaxesPrinter Add a PrinterSelect Browse for a printer You have completed adding the printer Network Setup Wizard on all the network computersPrinters and Faxes Local printer… Sharing an LPR printerEnter the Printer IP Address and the Port Name, as shown Select Create a new portClick Settings Select Keep existing driver Click Have DiskClick Next Select Yes, to print a test Device Management Technical SpecificationsMedia Access Control VPN Pass Through / Multi-SessionsWeight Power InputSafety & Emissions DimensionsTechnical Support Warranty What You Must Do For Warranty Service Trademarks FCC Statement

Related manuals

Manual 49 pages 3.13 Kb