Getting Started
Installation Location
The DI-604 can be positioned at any convenient place in your office or house. No special wiring or cooling requirements are needed. However, you should comply with the following guidelines:
Place the DI-604 on a flat horizontal plane. Keep away from any heating devices.
Do not place in a dusty or wet environment.
The recommended operational specifications of the DI-604 are:
Temperature | 32o F | ~ | 131o F |
Humidity | 5 % | ~ | 90 % |
In addition, remember to turn off the power, remove the power cord from the outlet, and keep your hands dry when you install the hardware.
Network Settings
To use the DI-604 correctly, you have to properly configure the network settings of your computers. The default IP address of the DI-604 is 192.168.0.1, and the default subnet mask is 255.255.255.0. These addresses can be changed as needed, but the default values are used in this manual. If the TCP/IP environment of your computer has not yet been configured, you can refer to Configuring Your PCs to Connect to the DI-604to configure it.
For example:
1.Configure your computer IP as 192.168.0.3, subnet mask as 255.255.255.0 and gateway as 192.168.0.1
Or more conveniently
2.Configure your computers to obtain TCP/IP settings automatically from the DHCP server feature of the DI-604
Since the IP address of the DI-604 is 192.168.0.1, the IP address of your computer must be 192.168.0.X (where “X” is a number between 2 and 254.) Each computer on your network must have a different IP address within that range. The default gateway must be 192.168.0.1 (the IP address of the DI-604).