Section 3 - Configuration
PPTP
PPTP: PPTP (Point to Point Tunneling Protocol) uses a virtual private network to connect to your ISP. This method of connection is primarily used in Europe. This method of connection requires you to enter a Username and Password (provided by your Internet Service Provider) to gain access to the Internet. The ISP provides the values for PPTP IP Address, PPTP Subnet Mask , PPTP Gateway IP Address, and PPTP Server IP Address (may be the same as the gateway).
Dynamic IP/Static IP: If your ISP has assigned a fixed IP address, select Static IP and enter the fixed IP address in the following field. For PPTP and L2TP, the subnet mask and the default gateway IP address must also be entered. If the ISP’s servers assign these values upon establishing a connection, select Dynamic IP.
IP Address: When required, this value is provided by the
ISP.
Subnet Mask: When required, this value is provided by the ISP.
Default Gateway: When required, this value is provided by the ISP.
Server IP Address: When required, this value is provided by the ISP.
Username: This value is provided by agreement between you and the ISP.
34 |