D-Link DI-724GU manual Detected xDSL or Other Frame Relay Network

Page 48

Section 3 - Configuration

Connection Type:

Detected xDSL or Other Frame Relay Network :

By default, the router automatically determines whether the underlying connection is an xDSL/Frame-relay network or some other connection type (such as cable modem or Ethernet), and it displays the result as Detected xDSL or Frame Relay Network. If you have an unusual network connection in which you are actually connected via xDSL but for which you configure either “Static” or “DHCP” in the WAN settings, setting this option to xDSL or Other Frame Relay Network ensures that the router will recognize that it needs to shape traffic slightly differently in order to give the best performance. Choosing xDSL or Other Frame Relay Network causes the measured uplink speed to be reported slightly lower than before on such connections, but gives much better results.

When Connection Type is set to Auto-detect, the automatically detected connection type is displayed here.

D-Link DI-724GU User Manual

48

Image 48
Contents Page Table of Contents Troubleshooting Wireless Basics Networking Basics Warranty RegistrationPackage Contents System RequirementsIntroduction Features Hardware Overview Wlan LEDAntennas Hardware Installation Network Overview Wireless Installation Considerations Configuration Home Page Screen Setup Wizard Dynamic IP Address Static IP Address PPPoE Pptp L2TP Big Pond Wireless Setup Click Restart Printer Wizard Configuration Configuration Wireless Page WAN Page Subnet Mask MAC AddressPage IP Address Username Password Verify Password Service Name Page ISP Primary DNS Address Address Maximum Idle TimeL2TP MTU Big Pond Primary DNS Address Secondary DNS Address Enable RIP IP AddressPage Dhcp Always Broadcast Computer Name IP Address MAC Address Entry Dhcp ClientAdvanced Virtual ServerApplications Port Forwarding OpenStreamEngine Detected xDSL or Other Frame Relay Network Filters IP FiltersMAC Filters MAC Filters Parental Control Firewall DMZ Performance Dtim IntervalSchedules All Day 24hrsStart Time End TimeAdministration ToolsUser PortTime AutomaticNTP Server IntervalStart/End System Ddns Miscellaneous Select Print Server Status Device InfoPage Log What to View Logging LevelsOn Log Full On Schedule Statistics Wireless Status Active Sessions InternalPriority State Dir Print Server Help Troubleshooting Why does my wireless connection keep dropping?Why can’t I get a wireless connection? Resetting the DI-724GU to Factory Default Settings? What do I do if I forgot my encryption key.?Wireless Basics What is Wireless? Wireless Local Area Network WlanHome Small Office and Home OfficeCentralize your router or Access Point Eliminate InterferenceSecurity Wireless Modes Networking Basics Check your IP AddressStep Step Highlight Internet Protocol TCP/IP and click PropertiesTechnical Specifications Device ManagementContacting Technical Support Link Technical Support over the TelephoneLink Technical Support over the Internet Warranty Limited WarrantyLimited Software Warranty Non-Applicability of WarrantyWhat Is Not Covered Disclaimer of Other WarrantiesLimitation of Liability Governing LawTrademarks Copyright StatementCE Mark Warning FCC StatementRegistration