Section 3 - Configuration
LAN
IP Address:
Subnet Mask:
Local Domain Name:
Enable RIP:
The IP address of your router on the local area network. Your local area network settings are based on the address assigned here. For example, 192.168.0.1.
The subnet mask of your router on the local area network.
This entry is optional. Enter a domain name for the local network. The DHCP server will give this domain name to the computers on the LAN. So, for example, if you enter mynetwork.net here, and you have a PC with a name of chris, that PC will be known as chris.mynetwork.net. Note, however, if the router’s WAN settings specify Dynamic IP Address, and the ISP’s DHCP server assigns a domain name to the router, that domain name will override any name you enter here.
Enable RIP if required by the ISP, if the LAN has multiple routers, or if the LAN has auto- IP devices.
RIP Operating This router supports both version 2 and mode: version 1 of the RIP specification.
V1. Use if none of the routers supports Version 2.
V2 Broadcast. Use if some routers are capable of Version 2, but some are only capable of Version 1. V2 Multicast. Use if this is the only rounter on the LAN or if all the routers support Version 2.
40 |