Linksys WET200 manual Chapter Advanced Configuration, Setup

Page 13

Chapter 6

Chapter 6:

Advanced Configuration

Open your web browser, enter http://192.168.1.226 in the Address field, and press the Enter key.

Address Bar

NOTE: The default IP address is 192.168.1.226. If the IP address is changed using DHCP, enter the assigned IP address instead of the default.

The web-based utiity’s login screen appears. The first time you open the utility, enter admin (the default username) in the username field, enter admin in the password field, then click OK.You can change the username and password later from the Administration tab’s Password screen.

Login Screen

After you log in, the Setup screen appears. To access other screens, select one of the five tabs at the top of the screen: Setup, Wireless, Switch, Administration, and System Status. Each tab contains additional screens. These tabs and their screens are explained in detail below.

Setup

The Setup tab contains one screen, the Setup screen. The Setup screen contains basic information for the Bridge.

Host Name  This is the host name assigned to the Bridge. This host name will be published to your DNS server if the Bridge is configured to acquire its IP address through DHCP. In that case, Linksys recommends following company policy for host name assignment. The default name is Linksys.

Device Name  You may assign any device name to the Bridge. This name is used only by the Bridge administrator for identification purposes. Unique, memorable names are helpful. The default name is WET200.

Wireless-G Business Ethernet Bridge

Advanced Configuration

Contact  Enter the name of the administrator responsible for the system.

Location  This field is used for entering a description of where the Bridge is located, such as 3rd floor.

IP Address Type  Select how the WET200 will obtain its IP address, either Static IP Address (default) or Automatic Configuration-DHCP.

•• Automatic Configuration-DHCP  The WET200 will obtain its IP address automatically from a DHCP server.

NOTE: If the DHCP server is not connected to the Bridge ports but will be accessed via the wireless interface, you must first create a wireless connection before attempting to enable DHCP on the WET200. Otherwise, the device will not be able to obtain an IP address and the web- based utility will be inaccessible. For detailed information on creating a wireless connection, see the “Wireless > Basic settings” section.

•• Static IP Address  To assign a static IP address to the Bridge, select this option and fill in the IP Settings fields. You should make sure that this IP address does not conflict with the IP addresses of any other devices on the network.

IP Settings  If you set the IP Address Type field to Static IP Address, complete the following fields.

•• Local IP Address  Enter the IP address of the Bridge (default 192.168.1.226) into this field.

•• Subnet Mask  Enter the subnet mask into this field.

•• Default Gateway  IP address of the gateway router (default 0.0.0.0) on the current IP subnet, used to reach other IP networks.

•• Primary DNS Server  Enter the IP address of the DNS server (default 0.0.0.0) into the field.

•• Secondary DNS Server  A second DNS address (default 0.0.0.0) can be specified in this field.

Setup Screen

9

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Wireless-G Business Ethernet Bridge About This Guide About This GuideIcon Descriptions Online ResourcesTable of Contents Appendix B Glossary Appendix a Wireless Security ChecklistAppendix E Regulatory Information Chapter Introduction ChapterNetwork Topology Chapter Planning Your Wireless NetworkNetwork Layout Example of WET200 in Ad-Hoc Mode Product Overview Chapter Product OverviewFront Panel Back PanelInstallation Chapter InstallationPlacement Options OverviewWall-Mount Option InstallationAccessing the Web-Based Utility Chapter Quick Configuration OverviewSetup WirelessAdministration SwitchSystem Status Advanced Configuration Chapter Advanced ConfigurationSetup Wireless Basic Settings WirelessWireless Site Survey WPA-Personal aka WPA-PSK Wireless Wireless SecurityWPA-Enterprise WPA2-PersonalWPA2-Enterprise Wireless Advanced Settings SwitchSwitch Port Management Switch Vlan Switch Port MirroringPort Mirroring Setting 802.1Q Port-Based Switch MAC Based ACLSwitch Spanning Tree Switch QoSSwitch MAC Table AdministrationAdministration Password Administration Web AccessAdministration Factory Defaults Administration SnmpSystem Status Wireless Status Administration Firmware UpgradeSystem Status System Status System StatusAd-Hoc System Status Port StatisticsPersonal, etc Wireless Security Checklist Appendix a Wireless Security ChecklistAppendix a General Network Security GuidelinesAppendix B Glossary Appendix BGlossary Http HyperText Transport Protocol GlossarySnmp Simple Network Management Protocol a Smtp Simple Mail Transfer Protocol The standard eAppendix B Specifications Appendix C SpecificationsAppendix C Limited Warranty Warranty InformationAppendix D Regulatory Information Appendix EAvis d’Industrie Canada Wireless DisclaimerDansk Danish Miljøinformation for kunder i EU Appendix E Norsk Norwegian Miljøinformasjon for kunder i EU Appendix E Contact Information Appendix F
Related manuals
Manual 3 pages 10.7 Kb

WET200 specifications

The Linksys WET200 Wireless-G Ethernet Bridge is designed for businesses looking to extend their network capabilities without the hassle of running Ethernet cables throughout their premises. This high-performance device effectively connects wired devices to a wireless network, providing businesses with efficient access to internet resources and network shares.

One of the standout features of the WET200 is its dual-functionality. It operates as both an Ethernet bridge and a wireless access point, allowing users to connect multiple wired devices, such as printers, servers, or computers, to a wireless network. This flexibility makes it an excellent choice for environments where network mobility is crucial, such as offices, retail establishments, and warehouses.

Another key characteristic of the Linksys WET200 is its support for Wireless-G technology, offering a maximum wireless speed of up to 54 Mbps. This ensures that data transfer between connected devices is quick and reliable while providing adequate bandwidth for various applications, including file sharing and streaming. The device also adheres to the IEEE 802.11b/g standard, which means it is compatible with a vast number of other wireless devices.

The WET200 features a simple setup process, aided by its web-based configuration interface. This user-friendly interface allows for easy management of networking settings, making it accessible for both novice and experienced users. Security is a significant consideration, and the WET200 includes robust encryption protocols such as WEP, WPA, and WPA2 to protect data transmission over the wireless network.

Moreover, the Ethernet Bridge is equipped with two 10/100 Ethernet ports, enabling connections to multiple wired devices simultaneously. Its compact design allows for easy placement in various locations, and the inclusion of LEDs provides users with real-time feedback on connectivity status.

Overall, the Linksys WET200 Wireless-G Ethernet Bridge stands out with its combination of performance, flexibility, and ease of use, making it an invaluable asset for businesses aiming to expand their wired network capabilities without compromising on performance or security. It's a smart solution for those who need to harness the power of wireless connectivity while ensuring that their critical wired devices remain connected to the network efficiently.
Top Page Image Contents