Linksys WET200 manual Chapter Installation, Overview, Connection, Placement Options

Page 9

Chapter 4

Chapter 4:

Installation

Overview

This chapter explains how to place and connect the Bridge. Depending on your application, you might want to set up the device first before mounting the device. Refer to “Chapter 6: Advanced Configuration”.

Connection

There are two ways to install the Bridge: using Power over Ethernet (PoE), or using the supplied power adapter. Follow the appropriate procedure below.

Power over Ethernet

1.Connect one end of an Ethernet network cable to the LAN port on your PC, then connect the other end to Ethernet port 1, 2, 3, or 4 on the Bridge.

Connect the Bridge to a PC

2.Connect one end of an Ethernet network cable to your PoE-equipped network switch or router, and connect the other end of the cable to port 5 on the Bridge.

Connect the PoE Cable

3.The Power LED on the front panel lights up green as soon as the power is connected properly.”

Proceed to the section, “Placement Options.”

Installation

Power Adapter

1.Connect one end of an Ethernet network cable to the LAN port on your PC, then connect the other end to Ethernet port 1, 2, 3, 4, or 5 on the Bridge.

Connect the Bridge to a PC

2.Connect the included power adapter to the Bridge’s Power port. Then plug the power adapter into an electrical outlet.

Connect the Power Adapter

3.The Power LED on the front panel lights up green as soon as the power is connected properly.”

Proceed to the following section, “Placement Options.”

Placement Options

There are three ways to place the Bridge. The first way is to place it on a horizontal surface, so that it sits securely on its four rubber feet. The second way is to stand the Bridge upright on a horizontal surface by attaching the included stands. The third way is to mount it on a wall. The stand and wall-mount options are explained in further detail below.

Stand Option

1.Locate the Bridge’s left side panel.

2.The Bridge includes two stands. Position one of the stands with its two large prongs facing outward, then insert the short prongs into the small slots in the

Wireless-G Business Ethernet Bridge

5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Wireless-G Business Ethernet Bridge About This Guide About This GuideIcon Descriptions Online ResourcesTable of Contents Appendix a Wireless Security Checklist Appendix B GlossaryAppendix E Regulatory Information Chapter Introduction ChapterChapter Planning Your Wireless Network Network TopologyNetwork Layout Example of WET200 in Ad-Hoc Mode Product Overview Chapter Product OverviewFront Panel Back PanelInstallation Chapter InstallationPlacement Options OverviewWall-Mount Option InstallationAccessing the Web-Based Utility Chapter Quick Configuration OverviewSetup WirelessSwitch AdministrationSystem Status Chapter Advanced Configuration Advanced ConfigurationSetup Wireless Wireless Basic SettingsWireless Site Survey WPA-Personal aka WPA-PSK Wireless Wireless SecurityWPA2-Personal WPA-EnterpriseWPA2-Enterprise Switch Wireless Advanced SettingsSwitch Port Management Switch Port Mirroring Switch VlanPort Mirroring Setting 802.1Q Port-Based Switch MAC Based ACLSwitch Spanning Tree Switch QoSSwitch MAC Table AdministrationAdministration Password Administration Web AccessAdministration Factory Defaults Administration SnmpSystem Status Wireless Status Administration Firmware UpgradeSystem Status System Status System StatusSystem Status Port Statistics Ad-HocPersonal, etc Wireless Security Checklist Appendix a Wireless Security ChecklistAppendix a General Network Security GuidelinesAppendix B Appendix B GlossaryGlossary Http HyperText Transport Protocol GlossarySnmp Simple Network Management Protocol a Smtp Simple Mail Transfer Protocol The standard eAppendix B Appendix C Specifications SpecificationsAppendix C Warranty Information Limited WarrantyAppendix D Regulatory Information Appendix EAvis d’Industrie Canada Wireless DisclaimerDansk Danish Miljøinformation for kunder i EU Appendix E Norsk Norwegian Miljøinformasjon for kunder i EU Appendix E Contact Information Appendix F
Related manuals
Manual 3 pages 10.7 Kb

WET200 specifications

The Linksys WET200 Wireless-G Ethernet Bridge is designed for businesses looking to extend their network capabilities without the hassle of running Ethernet cables throughout their premises. This high-performance device effectively connects wired devices to a wireless network, providing businesses with efficient access to internet resources and network shares.

One of the standout features of the WET200 is its dual-functionality. It operates as both an Ethernet bridge and a wireless access point, allowing users to connect multiple wired devices, such as printers, servers, or computers, to a wireless network. This flexibility makes it an excellent choice for environments where network mobility is crucial, such as offices, retail establishments, and warehouses.

Another key characteristic of the Linksys WET200 is its support for Wireless-G technology, offering a maximum wireless speed of up to 54 Mbps. This ensures that data transfer between connected devices is quick and reliable while providing adequate bandwidth for various applications, including file sharing and streaming. The device also adheres to the IEEE 802.11b/g standard, which means it is compatible with a vast number of other wireless devices.

The WET200 features a simple setup process, aided by its web-based configuration interface. This user-friendly interface allows for easy management of networking settings, making it accessible for both novice and experienced users. Security is a significant consideration, and the WET200 includes robust encryption protocols such as WEP, WPA, and WPA2 to protect data transmission over the wireless network.

Moreover, the Ethernet Bridge is equipped with two 10/100 Ethernet ports, enabling connections to multiple wired devices simultaneously. Its compact design allows for easy placement in various locations, and the inclusion of LEDs provides users with real-time feedback on connectivity status.

Overall, the Linksys WET200 Wireless-G Ethernet Bridge stands out with its combination of performance, flexibility, and ease of use, making it an invaluable asset for businesses aiming to expand their wired network capabilities without compromising on performance or security. It's a smart solution for those who need to harness the power of wireless connectivity while ensuring that their critical wired devices remain connected to the network efficiently.
Top Page Image Contents