D-Link 108G manual Disabled, Ssid Broadcast Security Mode

DI-634M User’s Manual Using the Configuration Menu

Disabled:

Super G without Turbo:

Super G with Dynamic Turbo:

Super G with Static Turbo:

Transmission Rate:

802.11g-Only Mode:

SSID Broadcast:

Security Mode:

Standard 802.11g support, no enhanced capabilities.

Capable of Packet Bursting, FastFrames, Compression, and no Turbo mode.

Capable of Packet Bursting, FastFrames, Compression, and Dynamic Turbo. This setting is backwards compatible with non-Turbo (legacy) devices. Dynamic Turbo mode is only enabled when all nodes on the wireless network is Super G with Dynamic Turbo enabled.

Capable of Packet Bursting, FastFrames, Compression, and Static Turbo. This setting is not backwards compatible with non-Turbo (legacy) devices. Static turbo mode is always on and is only enabled when all nodes on the wireless network is Super G with Static Turbo enabled.

Set a specific transmission rate. It is strongly recommended to set to Auto.

Select Enabled if your network uses all 802.11g devices. Select Disabled if you are using a mixure (802.11b and 802.11g) of wireless devices.

Choose Enabled to broadcast the SSID across the network. All devices on a network must share the same SSID (Service Set Identifier) to establish communication. Choose Disabled if you do not wish to broadcast the SSID over the network.

Select WEP, WPA-EAP,or WPA-PSKauthentication.

D-Link Systems, Inc. 16