Using the Configuration Menu | |
|
|
Advanced > Filters (MAC Filters)
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network.You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router.
Filters:
MAC Filters:
Name:
MAC Address:
DHCP Client:
Select the filter you wish to use; in this case, MAC filters was chosen.
Choose Disable MAC filters; allow MAC addresses listed below; or deny MAC addresses listed below.
Enter the name here.
Enter the MAC Address.
Select a DHCP client from the
39 |