Linksys WRT150N manual Open a command prompt. For Windows 98SE and Me

Page 57

Wireless-N Home Router

BOpen a command prompt. For Windows 98SE and Me:

• Click Start and Run. In the Open field, type command. Press the Enter key or click the OK button. For Windows 2000 and XP:

• Click Start and Run. In the Open field, type cmd. Press the Enter key or click the OK button. In the command prompt, type ping 192.168.1.1 and press the Enter key.

• If you get a reply, the computer is communicating with the Router.

• If you do NOT get a reply, please check the cable, and make sure Obtain an IP address automatically is selected in the TCP/IP settings for your Ethernet adapter.

CIn the command prompt, type ping followed by your Internet or WAN IP address and press the Enter key. The Internet or WAN IP Address can be found on the Status screen of the Router’s web-based utility. For example, if your Internet or WAN IP address is 1.2.3.4, you would enter ping 1.2.3.4 and press the Enter key.

• If you get a reply, the computer is connected to the Router.

• If you do NOT get a reply, try the ping command from a different computer to verify that your original computer is not the cause of the problem.

DIn the command prompt, type ping www.yahoo.com and press the Enter key.

•If you get a reply, the computer is connected to the Internet. If you cannot open a webpage, try the ping command from a different computer to verify that your original computer is not the cause of the problem.

•If you do NOT get a reply, there may be a problem with the connection. Try the ping command from a different computer to verify that your original computer is not the cause of the problem.

4.I am not getting an IP address on the Internet with my Internet connection.

•Refer to “Problem #3, I want to test my Internet connection” to verify that you have connectivity.

•If you need to register the MAC address of your Ethernet adapter with your ISP, please see “Appendix E: Finding the MAC address and IP Address for Your Ethernet Adapter.” If you need to clone the MAC address of your Ethernet adapter onto the Router, see the System section of “Chapter 5: Configuring the Wireless-N Home Router” for details.

•Make sure you are using the right Internet connection settings. Contact your ISP to see if your Internet connection type is DHCP, Static IP Address, or PPPoE (commonly used by DSL consumers). Please refer to the Setup section of “Chapter 5: Configuring the Wireless-N Home Router” for details on Internet connection settings.

•Make sure you have the right cable. Check to see if the Internet column has a solidly lit Link/Act LED.

•Make sure the cable connecting from your cable or DSL modem is connected to the Router’s Internet port. Verify that the Status page of the Router’s web-based utility shows a valid IP address from your ISP.

•Turn off the computer, Router, and cable/DSL modem. Wait 30 seconds, and then turn on the Router, cable/DSL modem, and computer. Check the Status tab of the Router’s web-based utility to see if you get an IP address.

Appendix A: Troubleshooting

51

Common Problems and Solutions

Page 56 Page 58
Image 57
Page 56 Page 58
Contents GHz Wireless- N How to Use This User Guide Copyright and TrademarksWord definition Table of Contents Appendix B Wireless Security Appendix a TroubleshootingCommon Problems and Solutions Frequently Asked Questions Appendix C Upgrading Firmware Appendix D Windows HelpRouter’s Front Panel Router’s Back Panel26 Access Restrictions Tab Internet Access Policy Welcome IntroductionWhat’s in this User Guide? Wireless-N Home Router Ad-Hoc versus Infrastructure Mode Planning Your Wireless NetworkSsid service set identifier your wireless network’s name Network TopologyPlanning Your Wireless Network Network Layout Back Panel Getting to Know the Wireless-N Home RouterTop Panel Front PanelHardware Installation Connecting the Wireless-N Home RouterSetup Configuring the Wireless-N Home RouterWireless OverviewAdministration Access RestrictionsSecurity Applications & GamingSetup Tab Basic Setup How to Access the Web-based UtilityInternet Setup StatusPPPoE Static IPTelstra Cable PptpPacket a unit of data sent over a network Optional SettingsNetwork Setup Dhcp Server SettingRouter IP Dhcp Reservation Time SettingSetup Tab Ddns Ddns ServiceDynDNS.org TZO.com 10 Setup Tab Ddns TZO.comMAC Address Clone Setup Tab MAC Address CloneAdvanced Routing Setup Tab Advanced RoutingDynamic Routing Static Routing13 Routing Table Basic Wireless Settings Wireless Tab Basic Wireless SettingsWireless Security Wireless Tab Wireless SecurityPSK-Personal PSK2-PersonalPSK2-Enterprise PSK-EnterpriseRadius Wireless MAC Filter Wireless Tab Wireless MAC FilterAccess Restrictions MAC Address Filter ListAdvanced Wireless Wireless Tab Advanced Wireless SettingsWireless-N Home Router Internet Filter Security Tab FirewallWeb Filter FirewallVPN Passthrough Security Tab VPN PassthroughAccess Restrictions Tab Internet Access Policy Internet Access PolicyTo create a policy 28 List of PCs Single Port Forwarding Applications & Gaming Tab Single Port ForwardingPort Range Forwarding Applications & Gaming Tab Port Range ForwardingPort Range Triggering Applications & Gaming Tab Port Range TriggeringDMZ Applications & Gaming Tab DMZWireless QoS Quality of ServiceInternet Access Priority Applications and Gaming Tab QoS35 QoS Applications Add a New Application 39 QoS Voice Device SummaryRouter Access Administration Tab ManagementWeb Access Remote AccessUPnP Backup and RestoreLog Administration Tab Log43 Administration Tab Diagnostics Administration Tab DiagnosticsFactory Defaults Administration Tab Factory DefaultsUpgrade Firmware Administration Tab Firmware UpgradeStatus Tab Router Router InformationInternet Connection Local Network Status Tab Local Network51 Status Tab Wireless Status Tab WirelessAppendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a PC Wireless-N Home Router Open a command prompt. For Windows 98SE and Me Application Name Protocol To IP Address EnabledCan’t get the Internet game, server, or application to work Application Name Start and End PortWireless-N Home Router Need to upgrade the firmware To start over, I need to set the Router to factory defaultsFirmware upgrade failed, and/or the Power LED is flashing My DSL service’s PPPoE is always disconnectingPower LED keeps flashing Where is the Router installed on the network? Frequently Asked QuestionsIs IPSec Pass-Through supported by the Router? Does the Router support IPX or AppleTalk?How can I block corrupted FTP downloads? What are the advanced features of the Router? What is DMZ Hosting?Will the Router function in a Macintosh environment? Is the Router cross-platform compatible?What is the Ieee 802.11b standard? What is the Ieee 802.11g standard?What Ieee 802.11g features are supported? What Ieee 802.11b features are supported?What is roaming? What is infrastructure mode?What is ISM band? What is Spread Spectrum?What is a MAC Address? What is DSSS? What is FHSS? And what are their differences?How do I reset the Router? How do I resolve issues with signal loss?Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-N Home Router Appendix C Upgrading Firmware Figure C-1 Firmware UpgradeAppendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Windows 98SE or Me Instructions Figure E-1 IP Configuration ScreenFor the Router’s Web-based Utility Windows 2000 or XP InstructionsAppendix F Glossary Wireless-N Home Router Wireless-N Home Router Wireless-N Home Router Wireless-N Home Router Appendix G Specifications ModelLEDs Storage Temp Operating TempOperating Humidity Storage HumidityLimited Warranty Appendix H Warranty InformationFCC Statement Appendix I Regulatory InformationWireless-N Home Router Wireless-N Home Router Wireless-N Home Router Wireless-N Home Router Wireless-G Home Router Appendix J Contact Information Need to contact Linksys?Information section in this Guide
Top Page Image Contents