Linksys WRT150N manual Wireless-N Home Router

Page 60

Wireless-N Home Router

Follow these steps to set DMZ hosting:

1.Access the Router’s web-based utility by going to http://192.168.1.1 or the IP address of the Router. Go to the Applications & Gaming => Port Range Forwarding tab.

2.Disable or remove the entries you have entered for forwarding. Keep this information in case you want to use it at a later time.

3.Go to the Applications & Gaming => DMZ tab.

4.Select Enabled next to DMZ. For the computer you want exposed to the Internet, specify it by IP address or MAC address. If you use its IP address, select Destination IP Address, and enter its IP address the Destination IP Address field. If you use its MAC address, select Destination MAC Address, and enter its MAC address in the Destination MAC Address field. Please refer to “Appendix

E:Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an IP address. If you assigned a static IP address to the computer, then you can click the DHCP Reservation button on the Basic Setup screen to look up its static IP address.

5.Once completed with the configuration, click the Save Settings button.

9.I forgot my password, or the password prompt always appears when I am saving settings to the Router.

Reset the Router to factory default by pressing the Reset button for five seconds and then releasing it. If you are still getting prompted for a password when saving settings, then perform the following steps:

1.Access the Router’s web-based utility by going to http://192.168.1.1 or the IP address of the Router. Enter the default password admin, and click the Administration => Management tab.

2.Enter a different password in the Router Password field, and enter the same password in the second field to confirm the password.

3.Click the Save Settings button.

10.I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop-up window.

If you have proxy settings, you need to disable these on your computer. Because the Router is the gateway for the Internet connection, the computer does not need any proxy settings to gain access. Please follow these directions to verify that you do not have any proxy settings and that the browser you use is set to connect directly to the LAN.

For Microsoft Internet Explorer 5.0 or higher:

1.Click Start, Settings, and Control Panel. Double-click Internet Options.

2.Click the Connections tab.

3.Click the LAN settings button and remove anything that is checked.

4.Click the OK button to go back to the previous screen.

5.Click the option Never dial a connection. This will remove any dial-up pop-ups for PPPoE users.

For Netscape 4.7 or higher:

1.Start Netscape Navigator, and click Edit, Preferences, Advanced, and Proxies.

2.Make sure you have Direct connection to the Internet selected on this screen.

3.Close all the windows to finish.

Appendix A: Troubleshooting

54

Common Problems and Solutions

Image 60
Contents GHz Wireless- N How to Use This User Guide Copyright and TrademarksWord definition Table of Contents Appendix a Troubleshooting Appendix B Wireless SecurityCommon Problems and Solutions Frequently Asked Questions Appendix C Upgrading Firmware Appendix D Windows HelpRouter’s Back Panel Router’s Front Panel26 Access Restrictions Tab Internet Access Policy Introduction WelcomeWhat’s in this User Guide? Wireless-N Home Router Planning Your Wireless Network Ad-Hoc versus Infrastructure ModeSsid service set identifier your wireless network’s name Network TopologyPlanning Your Wireless Network Network Layout Getting to Know the Wireless-N Home Router Back PanelFront Panel Top PanelConnecting the Wireless-N Home Router Hardware InstallationConfiguring the Wireless-N Home Router SetupWireless OverviewAccess Restrictions AdministrationSecurity Applications & GamingHow to Access the Web-based Utility Setup Tab Basic SetupInternet Setup StatusStatic IP PPPoEPptp Telstra CableOptional Settings Packet a unit of data sent over a networkNetwork Setup Dhcp Server SettingRouter IP Time Setting Dhcp ReservationSetup Tab Ddns Ddns ServiceDynDNS.org 10 Setup Tab Ddns TZO.com TZO.comSetup Tab MAC Address Clone MAC Address CloneSetup Tab Advanced Routing Advanced RoutingDynamic Routing Static Routing13 Routing Table Wireless Tab Basic Wireless Settings Basic Wireless SettingsWireless Tab Wireless Security Wireless SecurityPSK-Personal PSK2-PersonalPSK-Enterprise PSK2-EnterpriseRadius Wireless Tab Wireless MAC Filter Wireless MAC FilterAccess Restrictions MAC Address Filter ListWireless Tab Advanced Wireless Settings Advanced WirelessWireless-N Home Router Security Tab Firewall Internet FilterWeb Filter FirewallSecurity Tab VPN Passthrough VPN PassthroughAccess Restrictions Tab Internet Access Policy Internet Access PolicyTo create a policy 28 List of PCs Applications & Gaming Tab Single Port Forwarding Single Port ForwardingApplications & Gaming Tab Port Range Forwarding Port Range ForwardingApplications & Gaming Tab Port Range Triggering Port Range TriggeringApplications & Gaming Tab DMZ DMZQoS Quality of Service WirelessInternet Access Priority Applications and Gaming Tab QoS35 QoS Applications Add a New Application Summary 39 QoS Voice DeviceAdministration Tab Management Router AccessWeb Access Remote AccessBackup and Restore UPnPAdministration Tab Log LogAdministration Tab Diagnostics 43 Administration Tab DiagnosticsAdministration Tab Factory Defaults Factory DefaultsAdministration Tab Firmware Upgrade Upgrade FirmwareStatus Tab Router Router InformationInternet Connection Status Tab Local Network Local NetworkStatus Tab Wireless 51 Status Tab WirelessAppendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a PC Wireless-N Home Router Open a command prompt. For Windows 98SE and Me Protocol To IP Address Enabled Application NameApplication Name Start and End Port Can’t get the Internet game, server, or application to workWireless-N Home Router To start over, I need to set the Router to factory defaults Need to upgrade the firmwareFirmware upgrade failed, and/or the Power LED is flashing My DSL service’s PPPoE is always disconnectingPower LED keeps flashing Frequently Asked Questions Where is the Router installed on the network?Is IPSec Pass-Through supported by the Router? Does the Router support IPX or AppleTalk?How can I block corrupted FTP downloads? What is DMZ Hosting? What are the advanced features of the Router?Will the Router function in a Macintosh environment? Is the Router cross-platform compatible?What is the Ieee 802.11g standard? What is the Ieee 802.11b standard?What Ieee 802.11g features are supported? What Ieee 802.11b features are supported?What is infrastructure mode? What is roaming?What is ISM band? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? What is a MAC Address?How do I reset the Router? How do I resolve issues with signal loss?Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-N Home Router Figure C-1 Firmware Upgrade Appendix C Upgrading FirmwareAppendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Figure E-1 IP Configuration Screen Windows 98SE or Me InstructionsWindows 2000 or XP Instructions For the Router’s Web-based UtilityAppendix F Glossary Wireless-N Home Router Wireless-N Home Router Wireless-N Home Router Wireless-N Home Router Appendix G Specifications ModelLEDs Operating Temp Storage TempOperating Humidity Storage HumidityAppendix H Warranty Information Limited WarrantyAppendix I Regulatory Information FCC StatementWireless-N Home Router Wireless-N Home Router Wireless-N Home Router Wireless-N Home Router Wireless-G Home Router Appendix J Contact Information Need to contact Linksys?Information section in this Guide