Linksys WAP54GX manual Basic Settings Screen

Page 19

Wireless-G Access Point with SRX

9.The Basic Settings screen will appear next. Enter a descriptive name in the Device Name field. Create a password that will control access to the Access Point’s Web-based Utility and Setup Wizard.

If your network router will automatically assign an IP address to the Access Point, then select Automatic- DHCP.

If you want to assign a static or fixed IP address to the Access Point, then select Static IP. Enter the IP Address, Subnet Mask, and Default Gateway settings. If you are not sure what changes you should make, then keep the default values.

Then, click the Next button to continue or Back to return to the previous page. Device Name - Enter a descriptive name for the Access Point.

Password - Enter a password that will control access to the Utility and Setup Wizard.

IP Address - This IP address must be unique to your network. (The default IP address is 192.168.1.245.)

Subnet Mask - The Access Point's Subnet Mask must be the same as the subnet mask of your Ethernet network.

Default Gateway - Enter the IP address of your network gateway (usually your router). Click the Next button to continue or the Back button to return to the previous screen.

Chapter 5: Setting up the Wireless-G Access Point with SRX

Figure 5-8: Basic Settings Screen

13

Using the Setup Wizard

Image 19

Contents 802 GHz .11g Wireless- G Copyright and Trademarks How to Use this User GuideTable of Contents Appendix B Wireless Security Appendix a TroubleshootingFrequently Asked Questions Back Panel Front PanelWireless Security Radius Screen Welcome IntroductionWhat’s in this User Guide? Wireless-G Access Point with SRX Network Topology Planning Your Wireless NetworkRoaming Network Layout Wireless Getting to Know the Wireless-G Access Point with SRXBack Panel Connections for Setup Connecting the Wireless-G Access Point withOverview Using the Setup Wizard Setting up the Wireless-G Access Point withConnect the Network Cable to the Router or Switch Screen Check the Access Point’s Status Screen Password Screen Basic Settings Screen Wireless Settings Screen Configuring the Access Point’s Wireless SettingsWEP 128-Bit WEP 64-BitWPA2 Personal WPA/WPA2 Personal WPA Personal14 WPA2 Mixed Mode Settings Screen WPA2 Mixed Mode16 Congratulations Screen Setup Configuring the Wireless-G Access Point with SRXNavigating the Utility Administration WirelessStatus Setup Network Setup Tab Accessing the UtilityNetwork Setup Setup Static IP Screen Basic Wireless Settings Wireless Basic Wireless Settings TabWireless Security Wireless Wireless Security TabWPA2-Mixed Radius Wireless MAC Filter Wireless Wireless MAC Filter TabAdvanced Wireless Wireless Advanced Wireless Settings TabWireless-G Access Point with SRX Management Administration Management TabLog Administration Log TabAdministration Firmware Upgrade Tab Administration Factory Defaults TabFirmware Upgrade AP’s Information Status Local Network TabLocal Network Wireless Network Status Wireless Network TabFrequently Asked Questions Appendix a TroubleshootingWhat Ieee 802.11g features are supported? What is the ISM band? Does the Access Point function as a firewall? Security Precautions Appendix B Wireless SecuritySecurity Threats Facing Wireless Networks Security Threats Facing Wireless Networks Wireless-G Access Point with SRX Appendix C Upgrading Firmware Shared Resources Appendix D Windows HelpNetwork Neighborhood/My Network Places Appendix E Glossary Wireless-G Access Point with SRX Wireless-G Access Point with SRX Wireless-G Access Point with SRX Wireless-G Access Point with SRX Standards Appendix F SpecificationsEnable/disable ModelStorage Humidity Operating HumidityLimited Warranty Appendix G Warranty InformationFCC Statement Appendix H Regulatory InformationWireless-G Access Point with SRX Wireless-G Access Point with SRX Wireless-G Access Point with SRX Wireless-G Access Point with SRX Dual-Band Wireless Access Point Appendix I Contact Information