Linksys WAP54GX manual Wireless Basic Wireless Settings Tab

Page 29

Wireless-G Access Point with SRX

The Wireless - Basic Wireless Settings Tab

Change the wireless network settings on this screen.

Basic Wireless Settings

Configure the Access Point using the available settings.

Mode. Select Mixed and both Wireless-G and Wireless-B computers will be allowed on the network, but the speed will be reduced. Select G-Only for maximum speed with Wireless-G products only. The final selection, B-Only, allows only Wireless-B products on the network. To disable wireless performance, select Disabled.

Network Name (SSID). Enter the name of the Access Point’s wireless network.

Channel. Select the appropriate channel from the list provided; this will be the channel that all of your wireless devices will use.

SSID Broadcast. This feature allows the SSID to be broadcast by the Access Point. You may want to enable this function while configuring your network, but make sure that you disable it when you are finished. With this enabled, someone could easily obtain the SSID information with site survey software and gain unauthorized access to your main network. Click Enabled to broadcast the SSID to all wireless devices in range. Click Disabled to increase network security and block the SSID from being seen on networked PCs.

Chapter 6: Configuring the Wireless-G Access Point with SRX

Figure 6-4: Wireless - Basic Wireless Settings Screen

23

The Wireless - Basic Wireless Settings Tab

Image 29
Contents 802 GHz .11g Wireless- G Copyright and Trademarks How to Use this User GuideTable of Contents Frequently Asked Questions Appendix a TroubleshootingAppendix B Wireless Security Back Panel Front PanelWireless Security Radius Screen Welcome IntroductionWhat’s in this User Guide? Wireless-G Access Point with SRX Roaming Planning Your Wireless NetworkNetwork Topology Network Layout Wireless Getting to Know the Wireless-G Access Point with SRXBack Panel Overview Connecting the Wireless-G Access Point withConnections for Setup Using the Setup Wizard Setting up the Wireless-G Access Point withConnect the Network Cable to the Router or Switch Screen Check the Access Point’s Status Screen Password Screen Basic Settings Screen Wireless Settings Screen Configuring the Access Point’s Wireless SettingsWEP 128-Bit WEP 64-BitWPA2 Personal WPA/WPA2 Personal WPA Personal14 WPA2 Mixed Mode Settings Screen WPA2 Mixed Mode16 Congratulations Screen Navigating the Utility Configuring the Wireless-G Access Point with SRXSetup Status WirelessAdministration Network Setup Accessing the UtilitySetup Network Setup Tab Setup Static IP Screen Basic Wireless Settings Wireless Basic Wireless Settings TabWireless Security Wireless Wireless Security TabWPA2-Mixed Radius Wireless MAC Filter Wireless Wireless MAC Filter TabAdvanced Wireless Wireless Advanced Wireless Settings TabWireless-G Access Point with SRX Management Administration Management TabLog Administration Log TabFirmware Upgrade Administration Factory Defaults TabAdministration Firmware Upgrade Tab Local Network Status Local Network TabAP’s Information Wireless Network Status Wireless Network TabFrequently Asked Questions Appendix a TroubleshootingWhat Ieee 802.11g features are supported? What is the ISM band? Does the Access Point function as a firewall? Security Threats Facing Wireless Networks Appendix B Wireless SecuritySecurity Precautions Security Threats Facing Wireless Networks Wireless-G Access Point with SRX Appendix C Upgrading Firmware Network Neighborhood/My Network Places Appendix D Windows HelpShared Resources Appendix E Glossary Wireless-G Access Point with SRX Wireless-G Access Point with SRX Wireless-G Access Point with SRX Wireless-G Access Point with SRX Enable/disable Appendix F SpecificationsModel StandardsStorage Humidity Operating HumidityLimited Warranty Appendix G Warranty InformationFCC Statement Appendix H Regulatory InformationWireless-G Access Point with SRX Wireless-G Access Point with SRX Wireless-G Access Point with SRX Wireless-G Access Point with SRX Dual-Band Wireless Access Point Appendix I Contact Information