Wireless-G Access Point with SRX
RADIUS
This option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Access Point.)
RADIUS Server. Enter the RADIUS server’s IP address.
RADIUS Port. Enter the port number used by the RADIUS server.
Shared Secret. Enter the Shared Secret key used by the Access Point and RADIUS server.
Encryption. Select a level of WEP encryption, 40/64 bits (10 hex digits) or 104/128 bits (26 hex digits).
Passphrase. To generate WEP keys using a Passphrase, enter the Passphrase and click the Generate key.
Key
TX Key. Select which Key to use for data transmissions.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Click Help for more information.
WEP
Encryption. Select a level of WEP encryption, 40/64 bits (10 hex digits) or 104/128 bits (26 hex digits).
Passphrase. To generate WEP keys using a Passphrase, enter the Passphrase and click the Generate key.
Key
TX Key. Select which Key to use for data transmissions.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Click Help for more information.
Chapter 6: Configuring the
Figure 6-9: Wireless Security - RADIUS Screen
Figure 6-10: Wireless Security - WEP Screen
26
The Wireless - Wireless Security Tab