Figure 3-1: Front Panel | 6 |
Figure 3-2: Back Panel | 7 |
Figure 4-1: Connect the Ethernet Network Cable | 8 |
Figure 4-2: Connect the Power | 8 |
Figure 5-1: Welcome Screen | 9 |
Figure 5-2: Connect the Network Cable to the Router or Switch Screen | 10 |
Figure 5-3: Connect the Network Cable to the Access Point Screen | 10 |
Figure 5-4: Power on the Access Point Screen | 11 |
Figure 5-5: Check the Access Point’s Status Screen | 11 |
Figure 5-6: Select the Access Point Screen | 12 |
Figure 5-7: Password Screen | 12 |
Figure 5-8: Basic Settings Screen | 13 |
Figure 5-9: Wireless Settings Screen | 14 |
Figure 5-10: Security Settings Screen | 15 |
Figure 5-11: WEP Settings Screen | 15 |
Figure 5-12: WPA Personal Settings Screen | 16 |
Figure 5-13: WPA2 Personal Settings Screen | 16 |
Figure 5-14: WPA2 Mixed Mode Settings Screen | 17 |
Figure 5-15: Confirm New Settings Screen | 18 |
Figure 5-16: Congratulations Screen | 18 |
Figure 6-1: Login Screen | 21 |
Figure 6-2: Setup - Automatic Configuration - DHCP Screen | 21 |
Figure 6-3: Setup - Static IP Screen | 22 |
Figure 6-4: Wireless - Basic Wireless Settings Screen | 23 |
Figure 6-5: Wireless - Wireless Security (WPA-Personal) Screen | 24 |
Figure 6-6: Wireless Security - WPA2-Personal Screen | 24 |
Figure 6-7: Wireless Security - WPA2-Mixed Screen | 25 |
Figure 6-8: Wireless Security - WPA-Enterprise Screen | 25 |