Linksys BEFSX41 manual Filter List 1 win-router, Step Two Build Filter Lists, IP Address

Instant Broadband® Series

Step Two: Build Filter Lists

Filter List 1: win->router

Note: The references in this section to “win” are references to Windows 2000 and XP.

1.In the new policy’s prop- erties screen, verify that the Rules tab is selected, as shown in Figure C-2. Deselect the Use Add Wizard check box, and click the Add button to create a new rule.

Figure C-2

2.Make sure the IP Filter List tab is selected, and click the Add button.

Figure C-3

EtherFast® Cable/DSL Firewall Router with 4-Port Switch/VPN Endpoint

3.The IP Filter List screen should appear, as shown in Figure C-4. Enter an appropriate name, such as win->router, for the filter list, and de-select the Use Add Wizard check box. Then, click the Add button.

Figure C-4

4.The Filters Properties screen will appear, as shown in Figure C-5. Select the Addressing tab. In the Source address field, select My

IP Address.	In the
Destination	address

field, select A specific IP Subnet, and fill in the

IP Address: 192.168.1.0

and Subnet mask: 255.255.255.0. (These are the Router’s default settings. If you have changed these settings, enter your new values.)

Figure C-5

100 101