Linksys BEFSX41 manual Filter List 2 router=win, Figure C-6

Instant Broadband® Series

5.If you want to enter a description for your filter, click the Description tab and enter the description there.

6.Click the OK button. Then, click the OK (for Windows XP) or Close (for Windows 2000) button on the IP Filter List window.

Filter List 2: router=>win

7.The New Rule Properties screen will appear, as shown in Figure C-6. Select the IP Filter List tab, and make sure that win -> router is highlighted. Then, click the Add button.

Figure C-6

EtherFast® Cable/DSL Firewall Router with 4-Port Switch/VPN Endpoint

8.The IP Filter List screen should appear, as shown in Figure C-7. Enter an appropriate name, such as router->winfor the filter list, and de-select the

Use Add Wizard check box. Click the Add button.

Figure C-7

9.The Filters Properties screen will appear, as shown in Figure C-8. Select the Addressing tab. In the Source address field, select A specific IP Subnet, and enter the IP Address: 192.168.1.0 and Subnet mask: 255.255.255.0. (Enter your new values if you have changed the default settings.) In the

Destination address field, select My IP Address.

Figure C-8

102 103