NETGEAR CG814M manual LAN Configuration Requirements, Internet Configuration Requirements

Page 22

Reference Manual for the Model CG814M Wireless Cable Modem Gateway

LAN Configuration Requirements

For the initial connection to the Internet and configuration of your gateway, you will need to connect a computer to the gateway which is set to automatically get its TCP/IP configuration from the gateway via DHCP.

Note: Please refer to Appendix C, "Preparing Your Network" for assistance with DHCP configuration.

Internet Configuration Requirements

Depending on how your ISP set up your Internet account, you will need one or more of these configuration parameters to connect your gateway to the Internet:

Host and Domain Names

ISP Domain Name Server (DNS) Addresses

Fixed or Static IP Address

If you already have cable Internet service and are replacing a cable modem, you may neeed these parameters.

CG814M Gateway Cable and Device MAC Address, that can be found on the bottom of your gateway, or on the Basic Settings page.

The MAC Address of the PC that you use to access the internet.

Where Do I Get the Internet Configuration Parameters?

There are several ways you can gather the required Internet connection information.

Your ISP should have provided you with all the information needed to connect to the Internet. If you cannot locate this information, you can ask your ISP to provide it or you can try one of the options below.

If you have a computer already connected using the active Internet access account, you can gather the configuration information from that computer.

For Windows 95/98/ME, open the Network control panel, select the TCP/IP entry for the Ethernet adapter, and click Properties.

For Windows 2000/XP, open the Local Area Network Connection, select the TCP/IP entry for the Ethernet adapter, and click Properties.

For Macintosh computers, open the TCP/IP or Network control panel.

2-2

Connecting the Gateway to the Internet

Image 22
Contents NETGEAR, Inc Trademarks World Wide Web Page Contents USB Appendix a Appendix C Contents Contents Audience About This ManualTypographical Conventions Special Message Formats Technical SupportAbout the CG814M Gateway Key FeaturesChapter Introduction Built-in Cable ModemContent Filtering Powerful, True Firewall802.11b Standards-based Wireless Networking USB Port Configurable Auto Uplink Ethernet ConnectionProtocol Support Easy Installation and Management What’s in the Box? Firewall’s Front PanelLED Descriptions Gateway’s Rear Panel CG814M Gateway Rear PanelIntroduction LAN Hardware Requirements Connecting the Gateway to the InternetWhat You Will Need Before You Begin Computer RequirementsInternet Configuration Requirements LAN Configuration RequirementsWhere Do I Get the Internet Configuration Parameters? Connecting the Gateway to the Internet Record Your Internet Connection Information Connecting the CG814M Gateway Connecting to Your ComputerEthernet USBConnecting to your Cable Service Provider WirelessConnecting the Power Adapter Log in to the GatewayLogin window opens as shown in -3below Connect to the Internet Connecting the CG814M Gateway to the Internet ConfigurationConnecting the Gateway to the Internet Connecting the Gateway to the Internet Connecting the Gateway to the Internet Considerations For a Wireless Network Chapter Wireless ConfigurationSecurity Wireless Settings Placement and RangeWireless Settings Restricting Wireless Access by MAC AddressConfiguring Wired Equivalent Privacy WEP Wireless Configuration Wireless Configuration Changing the Built-In Password Protecting Access to Your CG814M GatewayChapter Protecting Your Network Blocking Keywords, Sites, and Services Set Password menuBlock Keywords and Domains Click on the Block Sites link of the Content Filtering menu Blocking Services ProxyPort Blocking CookiesPort Forwarding Port Blocking menuTo forward inbound traffic Port Triggering Considerations for Port ForwardingTo configure Port Triggering Setting Up a Default DMZ Host Respond to Ping on Internet WAN PortProtecting Your Network Chapter Managing Your Network Network Status InformationViewing Gateway Status This screen shows the following parametersMenu 3.2 Router Status Fields Connection Status Connection screenLAN IP Setup Configuring LAN IP SettingsCurrent System Time Dhcp Use router as Dhcp serverViewing and Emailing Logged Information Logs menuErasing Configuration Enabling Logs Event E-mail NotificationRunning Diagnostic Utilities Diagnostics menuManaging Your Network Chapter Troubleshooting Basic FunctionsTest LED Stays On Power LED Not OnLocal Link LEDs Not On Troubleshooting the Web Configuration Interface Cable Link LED Not OnTroubleshooting a TCP/IP Network Using a Ping Utility Troubleshooting the ISP ConnectionTesting the LAN Path to Your Gateway Testing the Path from Your PC to a Remote Device Troubleshooting Appendix a Technical Specifications TCP/IPTechnical Specifications Appendix B Networks, Routing, and Firewall Basics Related Publications Basic Router ConceptsRouting Information Protocol What is a Router?IP Addresses and the Internet Three Main Address Classes Netmask EqualsSubnet Addressing Example of Subnetting a Class B AddressNetmask Notation Translation Table for One Octet Private IP Addresses Single IP Address Operation Using NAT Single IP Address Operation Using NATMAC Addresses and Address Resolution Protocol Related DocumentsInternet Security and Firewalls IP Configuration by DhcpDomain Name Server Denial of Service Attack What is a Firewall?Stateful Packet Inspection Ad-hoc Mode Peer-to-Peer Workgroup Wireless NetworkingWireless Network Configuration Infrastructure ModeExtended Service Set Identification Essid Authentication and WEP EncryptionWireless Channel Selection Table B-1 802.11b Radio Frequency ChannelsUplink Switches and Crossover Cables Ethernet CablingCable Quality Appendix C Preparing Your Network Preparing Your Computers for TCP/IP NetworkingConfiguring Windows 95, 98, and ME for TCP/IP Networking Install or Verify Windows Networking ComponentsPreparing Your Network Enabling Dhcp to Automatically Configure TCP/IP Settings Selecting Windows’ Internet Access MethodConfiguring Windows NT, 2000 or XP for IP Networking Verifying TCP/IP PropertiesConfiguring the Macintosh for TCP/IP Networking MacOS 8.6 orMacOS Verifying TCP/IP Properties for Macintosh Computers What Is Your Configuration Information? Verifying the Readiness of Your Internet AccountMail.xxx.yyy.com Preparing Your Network Restarting the Network Glossary Networks See Network Address Translation Connection