NETGEAR DM111P manual Trademarks, Statement of Conditions

Page 2

© 2006 by NETGEAR, Inc. All rights reserved.

Trademarks

NETGEAR is a trademark of Netgear, Inc.

Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.

Other brand and product names are registered trademarks or trademarks of their respective holders.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.

Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Federal Communications Commission (FCC) Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during normal operation.

ii

v1.1, September 2006

Image 2
Contents DM111P ADSL2+ Ethernet Modem Reference Manual Trademarks Statement of ConditionsEuropean Union Statement of Compliance Bestätigung des Herstellers/Importeurs Certificate of the Manufacturer/ImporterProduct and Publication Details Voluntary Control Council for Interference Vcci StatementV1.1, September Contents Chapter Troubleshooting About This Manual Conventions, Formats and ScopeHow to Use This Manual How to Print this ManualPrinting the Full Manual Page About the Modem Key FeaturesChapter Introduction Easy Installation and Management Protocol SupportAuto Sensing and Auto Uplink LAN Ethernet Connections What’s in the Box? Modem’s Front Panel LED DescriptionsRouter’s Rear Panel Information You Need Before You Begin Chapter Connecting to the InternetConnecting to the Internet Phone Using the Setup Wizard on the CDUsing the Web Browser Based Modem Management Utility Connecting your Modem to your Computer Adsl Phone LineOpening the Web-Based Modem Management Utility DM111P ADSL2+ Ethernet Modem Reference Manual Using the Web Based Utility to Connect to the Internet DM111P ADSL2+ Ethernet Modem Reference Manual Setting Up Your Ethernet Connection DM111P ADSL2+ Ethernet Modem Reference Manual DM111P ADSL2+ Ethernet Modem Reference Manual Changing the Password Chapter Managing Your ModemHow to Restore the Configuration from a File Backing Up, Restoring, or Erasing Your SettingsHow to Back Up the Configuration to a File How to Erase the ConfigurationHow to Upgrade the Modem Firmware Upgrading the Modem’s FirmwareClick Firmware Upgrade Network Management Information Viewing Modem StatusThis screen shows the following parameters Menu 3.2 Modem Status FieldsViewing the Adsl Status Running Diagnostic Utilities and Rebooting the Modem Router Statistics FieldsDM111P ADSL2+ Ethernet Modem Reference Manual DM111P ADSL2+ Ethernet Modem Reference Manual Chapter Troubleshooting Basic FunctioningAdsl LED not On or Blinking Power LED Not OnPower LED Never Turns Green LAN or Internet Port LEDs Not On Troubleshooting the Web Management Interface Troubleshooting the Internet Connection DM111P ADSL2+ Ethernet Modem Reference Manual Using the Reset button Restoring the Default Configuration and PasswordTroubleshooting Internet Browsing DM111P ADSL2+ Ethernet Modem Reference Manual Appendix a Technical Specifications DM111P ADSL2+ Ethernet Modem Reference Manual Appendix B Related Documents Document LinkDM111P ADSL2+ Ethernet Modem Reference Manual