NETGEAR DM111P manual Connecting your Modem to your Computer, Adsl Phone Line

DM111P ADSL2+ Ethernet Modem Reference Manual

Using ADSL Microfilters with Built-In Splitters. Use an ADSL microfilter with built-in splitter when there is a single wall outlet that must provide connectivity for both the modem and telephone equipment.

Connecting your Modem to your Computer

Before starting the utility, physically connect the modem as follows:

1.Connect the yellow Ethernet cable between the yellow Ethernet port on the modem and the Ethernet port on your PC.

Note: If you intend to connect to a router, do so after you have successfully obtained an Internet connection when your modem is directly connected to the PC. Refer to the documentation that came with the router for its installation instructions.

2.Connect the ADSL port on your modem to your telephone jack.

PC Ethernet Port

Telephone Jack

DM111 ADSL2+ Ethernet Modem

Figure 2-3

v1.1, September 2006