Accton Technology AC-IG2004W Verify Port Status, Connecting the Power Adapter, Condition Status

Installation

Note: When connecting to the WAN port, use 100-ohm Category 3, 4 or 5 shielded or

unshielded twisted-pair cable with RJ-45 connectors at both ends for all connections.

Connect the CheetahAccess™ Wireless Gateway to a Printer

If you connect a printer to the CheetahAccess Wireless Gateway, all the computer users connected to your LAN can have access to the printer. Connect a standard parallel printer cable to the Printer port on the CheetahAccess Wireless Gateway, and configure the printer server as described on page 6-1.

Connecting the Power Adapter

Plug the power adapter into the power socket on the CheetahAccess Wireless Gateway, and the other end into a power outlet. Check the indicator marked Power on the front panel to be sure it is on. If the power indicator does not light up, refer to Troubleshooting in Appendix A.

Verify Port Status

Check the power and port indicators as shown in the following table.

LED	Condition	Status
Power	On	CheetahAccess Wireless Gateway is receiving power.
(Green)
WLAN	On	The CheetahAccess Wireless Gateway has established a valid
(Green)		wireless connection.
WAN	On	The WAN port has established a valid network connection.
(Green)
LAN
Link	On	The indicated LAN port has established a valid network
(Green)		connection.
Activity	Flashing	The indicated LAN port is transmitting or receiving traffic.
(Amber)

2-8