Accton Technology AC-IG2004W manual WAN Configuration

Configuring the CheetahAccess™ Wireless Gateway

Valid IP addresses consist of four numbers separated by periods. The first three fields are the network portion, and can be from 0–255, while the last field is the host portion and can be from 1–254. However, remember not to include the gateway address of the CheetahAccess Wireless Gateway in the client address pool.

The Domain Name is optional, but this information may be specified so that it can be passed to the client PCs.

WAN Configuration

Specify the WAN connection type required by your Internet Service Provider, then click “More Configuration” to provide detailed configuration parameters for the selected connection type.

Specify one of the first three options to configure a WAN connection through the RJ-45 port (i.e., a connection to an xDSL modem or Cable modem). Specify the “Dial-up on Demand” option to configure a WAN connection through the serial port (i.e., a connection to an ISDN TA or PSTN modem).

Note: If WAN connections are configured for both the RJ-45 and serial port, the serial port will be used as a backup Internet connection if the primary RJ-45 WAN connection fails.

4-6