Accton Technology AC-IG2004W manual Set Time Zone, LAN Gateway and Dhcp Settings

Networking and Client Services

Use this menu to restrict management access based on a specific password. You must enter a password to access the configuration options provided by the menus. By default, there is no password. So, please assign a password to the Administrator as soon as possible, and store it in a safe place.

Passwords can contain from 3–12 alphanumeric characters, and are case-sensitive.

Note: If your password is lost, or you cannot gain access to the management interface,

press the Reset button on the front panel (holding it down for at least five seconds) to restore the factory defaults.

Set Time Zone

Set the time zone for the CheetahAccess Wireless Gateway. This information is used for log entries and client filtering.

LAN Gateway and DHCP Settings

Configure the gateway address of the CheetahAccess Wireless Gateway. To dynamically assign the IP address for client PCs, enable the DHCP Server, set the lease time, and then specify the address range. Also remember to configure all of your client PCs for dynamic address allocation.

4-5