Abocom AR1000 manual Check LLC Encapsulation or VC Based Route or VC Based Bridge

Page 8

(6)Enter VPI and VCI numbers. Then click “OK”.

(7)Check “LLC Encapsulation” or “VC Based Route” or “VC Based Bridge”.

(8)Click “Next” followed by “Configure”. Configure utility will automatically setup the router for you. Expect a minor delay for the router configuration.

(9)Click “Finish”. Now you have finished ADSL Router configuration. The ADSL Router will handshake with ADSL central site equipment (DSLAM) and try to make the ADSL connection.

- 7 -

Image 8

Contents Adsl Router LED Indicator Parts Names and functionsRear view of the Adsl Router Top View of Adsl Router LEDsConnectors on the Rear Panel Connectors on the rear panelOne PC Adsl Router direct connection Setting Up the Hardware EnvironmentConnecting All Cables to the Network Powering On the Adsl Router Router Mode/ IP over ATM RFC1577 Check Router Protocol and select IP over ATMBridge mode/RFC1483 bridge Check LLC Encapsulation or VC Based Route or VC Based Bridge