Actiontec electronic GT701WG-QW04 user manual Changing the User Name and Password

Page 18

Chapter 3 Performing a Basic Setup

6.Click Save and Restart in the “Save and Restart” screen.

7.The “Congratulations” screen appears. The Modem is successfully configured.

The Power light flashes rapidly while the Modem restarts, then glows steadily green when fully operational. The Internet light will also glow steadily green. The Modem is now configured and users can start surfing the Web.

If an error stating the Web browser was unable to connect to the Internet appears, check the configuration settings. Ensure all the information required by the ISP is entered correctly.

Changing the User Name and Password

To create or change the user name and password controlling access to the Modem’s Web Configuration screens, follow these instructions:

1.From the Setup/Configuration screen, select Admin Username/Password from the menu on the left side.

13

Image 18

Contents DSL Modem Table of Contents Specifications Using UtilitiesTroubleshooting Reference Glossary Firewall Security Level ServicesLimited Warranty 107 105This page left intentionally blank Package Contents Introduction1Minimum System Requirements Features DSL Light Power LightWireless Light Internet LightPhone Port Reset SwitchLine Port USB PortOther Problems Power PortUsed to connect the Power Cord to the Modem DSL service outage support and repairDSL service installation support Advanced Feature Support Wired/Wireless UpgradeIntroduction This page left intentionally blank Using Qwest DSL Connecting to the InternetDisconnecting from the Internet This page left intentionally blank Performing a Basic Setup Basic SetupTo configure the Modem for basic operation Page Changing the User Name and Password Click Save and Restart at the bottom of the screen Setting Up Static IP Address Configuring for a Single Static IP AddressTo set up the Modem to use a single static IP address Page Setting Up Static IP Page Click Save and Restart at the bottom of the screen Configuring for a Block of Static IP Addresses To set up the Modem to use a block of static IP addressesSetting Up Static IP Page Dhcp Server Configuration screen, select Static from Click Save and Restart from the menu on the left sideClick Save and Restart at the bottom of the screen Configuring5 Advanced Settings Accessing Advanced SettingsWAN IP Address Transparent Bridging PPP Auto Connect Encapsulation PPPoA only Save & ApplySpecify a Static IP Address Wireless Settings Channel OffWEP WEP+802.1x WPA Wireless MAC Authentication Wireless Advanced SettingsDhcp Server DNS Dynamic or Static Dhcp Server ConfigurationBeginning IP Address, Ending IP Address DNS ServerServices Blocking Website Blocking Remote Management/TelnetPort Forwarding To remove forwarded ports, highlight them, then click RemoveDMZ Hosting Clicking Advanced brings up the Advanced Port Forward screenFirewall Dynamic RoutingNAT Network Address Translation Static RoutingIP QoS Setting Source Telnet Timeout Setting LAN IP AddressThis page left intentionally blank Accessing Status To access the Status screens, follow these instructionsViewing Modem’s Status Current Status Viewing the Modem’s Status WAN Status LAN Status Dhcp User ListPage Using Utilities Web Activity LogDSL Settings Restore Default Settings Upgrade FirmwareThis page left intentionally blank Troubleshooting LAN Connection FailureCannot Connect to the Internet CMD Time out error occurs when entering a URL or IP Address This page left intentionally blank Reference Locating Computer InformationLocating Windows Operating System Files Appendix a Reference Click Search Static IP Address On the Computer Windows 98 SEPage 192.168.0.2 Windows Me Enter the following numbers in the Subnet mask text boxAppendix b Static IP on the Computer Do not include the periods they are automatically entered Windows Page Appendix b Static IP on the Computer Enter the following numbers in the IP Address text box Windows XP Page Appendix b Static IP on the Computer Enter the following address in the IP Address text box Comparing DSL Service with a Dial-Up Modem Computer SecurityModem Security Computer SecurityInternet Browsers Electronic Security This page left intentionally blank WAN PPP, DHCP, Static IP Specifications dGeneral Full-rate Adsl InterfacePower, DSL, Internet, Ethernet, USB, Wireless Wireless Operating RangeLED Indicators EnvironmentalAccess Point GlossaryPage Ssid This page left intentionally blank Firewall Security Level Services Medium Security Level Low Security Level Service Acronym Definitions 323 Real audio/videoIcmp 120Alternativeg System Setup ClassicPage Appendix g Alternative System Setup Connecting to the ISP Then press Enter on the keyboardAppendix g Alternative System Setup 100 Self Help Basic Setup Support Getting OnlineAdditional Technical Support Options QwestAdvanced Feature Support Networking LAN SupportAppendix h Additional Technical Support Options 104 Regulatory Compliance Notices ModificationsClass B Equipment Miscellaneous Legal Notices All other names are the property of their respective ownersLimited Warranty 107108 Limited Warranty 110