Chapter 4 Using Advanced Setup
Static Routing
Selecting Static Routing in the “Advanced Settings” screen generates the “Static Routing” screen. Enter the addresses in their respective text boxes, then click Add. The address will appear in the “Static Routing Table.” To remove an address, high- light it by clicking on it in the Static Routing Table, then click Remove.
UPnP (Universal Plug and Play)
Selecting UPnP in the “Configuring the Advanced Settings” screen generates the “UPnP” screen. In this screen, the Universal Plug and Play option is turned on or off by activating the appropriate circle.
Universal Plug and Play is a
☞Note: Activating UPnP presents a slight security risk. After finishing with the hardware or software using UPnP, Actiontec recommends deactivating UPnP.
45