Actiontec electronic GT704WR user manual Glossary, Access Point

Page 98

Glossary

E

Access Point

A device that allows wireless clients to connect to one another. An access point can also act as a bridge between wireless clients and a “wired” network, such as an Ethernet network. Wireless clients can be moved anywhere within the cover- age area of the access point and remain connected to the network. If connected to an Ethernet network, the access point monitors Ethernet traffic and forwards appropriate Ethernet messages to the wireless network, while also monitoring wireless traffic and forwarding wireless client messages to the Ethernet network.

ATM (Asynchronous Transfer Mode)

A networking technology based on transferring data in fixed-size packets.

Client

A desktop or mobile computer connected to a network.

DHCP (Dynamic Host Configuration Protocol)

A protocol designed to automatically assign an IP address to every computer on the network.

DNS (Domain Name System) Server Address

Allows Internet host computers to have a domain name and one or more IP addresses. A DNS server keeps a database of host computers and their respective domain names and IP addresses so that when a user enters a domain name into a Web browser, the user is sent to the proper IP address. The DNS server address used by computers on the home network corresponds to the location of the DNS server the ISP has assigned.

DSL (Digital Subscriber Line) Modem

A modem that uses existing phone lines to transmit data at high speeds.

Encryption

A method to provide wireless data transmissions a level of security.

ESSID (Extended Service Set Identifier)

A unique identifier for a wireless network. Also known as “SSID.”

95

Image 98
Contents Wireless Cable/DSL Router Table of Contents Setting Up Static IP on the Computer Setting Up a NetworkTroubleshooting SpecificationsPackage Contents Introduction1Features Minimum System RequirementsPower Light Getting to Know the RouterEthernet Lights Wireless LightInternet Light Ethernet PortsPower port is used to connect the Power cord to the Router Reset SwitchPower Port Cable/DSL PortThis page left intentionally blank Setting Up Router Connecting a Computer to the RouterPage Setting Up the Router Page Setting Up the Router Page Setting Up the Router Page Setting Up the Router Page Setting Up the Router Page Installation Buddy checks the configuration of the Router This page left intentionally blank To configure the Router for basic operation Performing a Basic SetupBasic Setup Page Performing a Basic Setup Changing the Admin User Name and Password Click Save and Restart at the bottom of the screenPerforming a Basic Setup This page left intentionally blank To access the Advanced Setup configuration screens Using Advanced SetupAccessing Advanced Setup Page WAN IP Address Dialout on-demand/Idle timeout Obtain an IP Through DhcpUsing Advanced Setup Wireless Settings ChannelOff WEPWEP+802.1x Wireless MAC Authentication WPAWireless Advanced Settings LAN IP Address Dhcp ServerBeginning IP Address Ending IP AddressDNS Server Services BlockingDNS Dynamic or Static Website Blocking Remote Management Port Forwarding DMZ Hosting Firewall Dynamic RoutingStatic Routing UPnP Universal Plug and PlayMAC Address Cloning Viewing Router’s Settings StatusPage Routing Table WAN StatusLAN Status Active User ListUsing Utilities Web Activity LogRestore Default Settings Upgrade Firmware This page left intentionally blank Setting Up a Network EthernetPage Setting Up a Network Page Setting Up a Network Wireless Setting Up a Network This page left intentionally blank Using on Network With Another Router/Gateway TroubleshootingTroubleshooting Physical ConnectionsFrequently Asked Questions Will cordless phones interfere with the Router? Which wireless cards will work with the Router?Do I need a specific cable or DSL modem to use the Router? Network What is the valid IP range I can use for my home network?How do I find out which IP address my computer is using? Yes, if the application is designed to run over a network Connections What is WEP?What is the default username for the Router? How many computers can be connected through the Router?How do I make a HEX-based WEP key? What is WPA?What is NAT and how does it protect my network? Does the Router function as a firewall?This page left intentionally blank Reference Locating Computer InformationLocating Windows Operating System Files Appendix a Reference Click Search Setting Up Static IP On the Computer Windows 98 SEPage 192.168.0.2 Windows Me Enter the following address in the Subnet mask text boxAppendix B Setting Up Static IP on the Computer 192.168.0.2 Windows Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Windows XP Page Appendix B Setting Up Static IP on the Computer Enter the following address in the IP Address text box Comparing Broadband Service with a Dial-Up Modem Computer SecurityInternet Browsers Router SecurityComputer Security Electronic Security This page left intentionally blank Specifications D GeneralPower, Internet, Wireless, Ethernet Wireless Operating RangeLED Indicators EnvironmentalAccess Point GlossaryPage Ssid This page left intentionally blank Firewall Security Level Services Table High Security LevelMedium Security Level Low Security LevelService Acronym Definitions Basic Security Level323 Real audio/videoIcmp 120Non-Windows G System Setup Classic104 Appendix G Non-Windows Setup 106 Class B Equipment Regulatory Compliance NoticesModifications Miscellaneous Legal Notices All other names are the property of their respective ownersLimited Warranty 109110 Limited Warranty 112