Airlink II user manual User’s Manual

Page 19

User’s Manual

modems. Also ensure you are set for the correct baud rate. Default is 9600.

• see the Troubleshooting section for more.

5.Select the Maximize button (the arrows button). This causes Wireless ACE to display its Status Screen.

6.Select Tools→Communications Options. This causes ACE to display the Communications Options Dialog box.

7.Select Local Host (PPP Direct to Modem) radio button, ensure either “Only for Local” or “For Local and Remote Modems” is selected in the AutoDial-Up (Window DUN) box.

8.Select the OK button.

AirLink Communications, Inc.

August 9, 2001

Page 15

Image 19

Contents AirLink Page Getting Started Table of ContentsPage Cdpd Network What is CDPD?Description Front of Raven IIBack of Raven Modem LEDs What They MeanConfiguring the Modem Contacting the Cdpd Service ProviderAirLink Raven II Cdpd Modem Select Don’t detect my modem…., then Next AirLink Raven II Cdpd Modem User’s Manual Creating the PPP Connection Select Start→Settings→Dial-Up NetworkingUser’s Manual Select the Server Types tab. Make the following selections Uncheck disable Use IP header compression Uncheck disable Start terminal screen minimized Clear the User Name, Password and Domain fieldUser name and Password are blank Installing and Using Wireless ACE User’s Manual AirLink Raven II Cdpd Modem User’s Manual AirLink Finding Cdpd ServiceRegistration Problems Adding the Modem in Windows for more Troubleshooting Error 629 or ErrorRaven II Mounted in Mounting Bracket Mounting the RavenSnap-in Mounting Bracket Grounding the Raven Case Connecting the antennaConnecting the serial cable Connecting the power cableRTU RTU to Raven II setup Additional Information Modem Technical SpecificationsInfo@airlink.com More InformationAirLink Raven II Cdpd Modem