Airlink II user manual Additional Information, Modem Technical Specifications

Page 30

AirLink Raven II CDPD Modem

4. Additional Information

4.1 Modem Technical Specifications

Physical Characteristics

Weight:	< 1 lb.
Size:	5.1" x 3" x 1"
Status LEDs:	Power
	Channel Acquired
	Link Status
	Network Registration
	RSSI
	Transmit/Receive
	Block Errors

RF Antenna Connector

Novatel Wireless CDPD Modem NRM6832

Integrated	Full Duplex
TCP/IP
Transmit	600 mW
Power
Transmit	824-849 MHz
Receive	869-894 MHz
RF Protocol	CDPD 1.1
Airlink Data	19.2 Kbps
Rate
Serial	AT Commands, PPP, SLIP
Protocols
RTU Protocol	Modbus, BSAP, DNP, Others
conversions

Power Requirements

50 Ohm TNC

Serial Interface

RS-232 DB-9F

1200-38,400 bps

Input Voltage

Input

Current

Typical

Receive

Typical

Transmit

9 VDC to 30 VDC 30mA to 450mA

50mA at 12 VDC

280mA at 12 VDC

Environmental

Operating Temperature Range: -30°C to 70°C

(10% duty cycle above 60°C) Humidity: 5% - 95% Non-condensing

Warranty

Software 1 year updates & feature enhancements

Hardware 1 year parts and labor Extended warranties available

Page 26

AirLink Communications, Inc.

Image 30

Contents AirLink Page Table of Contents Getting StartedPage What is CDPD? Cdpd NetworkFront of Raven IIBack of Raven Modem LEDs What They Mean DescriptionContacting the Cdpd Service Provider Configuring the ModemAirLink Raven II Cdpd Modem Select Don’t detect my modem…., then Next AirLink Raven II Cdpd Modem User’s Manual Select Start→Settings→Dial-Up Networking Creating the PPP ConnectionUser’s Manual Select the Server Types tab. Make the following selections Uncheck disable Use IP header compression Clear the User Name, Password and Domain field Uncheck disable Start terminal screen minimizedUser name and Password are blank Installing and Using Wireless ACE User’s Manual AirLink Raven II Cdpd Modem User’s Manual Finding Cdpd Service AirLinkRegistration Problems Troubleshooting Error 629 or Error Adding the Modem in Windows for moreMounting the Raven Raven II Mounted in Mounting BracketSnap-in Mounting Bracket Connecting the power cable Connecting the antennaConnecting the serial cable Grounding the Raven CaseRTU RTU to Raven II setup Modem Technical Specifications Additional InformationMore Information Info@airlink.comAirLink Raven II Cdpd Modem