Alcatel Carrier Internetworking Solutions 060187-10 REV D manual Ospf Defaults Table

Configuring OSPF OSPF Defaults Table

OSPF Defaults Table

The following table shows the default settings of the configurable OSPF parameters.

Parameter Description	Command	Default Value/Comments
Enables OSPF.	ip ospf status	disabled
Enables an area.	ip ospf area status	disabled
Enables an interface.	ip ospf interface status	disabled
Enables OSPF redistribution.	ip ospf redist status	disabled
Sets the overflow interval value.	ip ospf exit-overflow-interval	0
Assigns a limit to the number of	ip ospf extlsdb-limit	-1
External Link-State Database
(LSDB) entries.
Configures timers for Shortest Path	ip ospf spf-timer	delay: 5
First (SPF) calculation.		hold: 10
Creates or deletes an area default	ip ospf area default-metric	ToS: 0
metric.		Type: OSPF
		Cost: 1
Configures OSPF interface dead	ip ospf interface dead-interval	40 seconds (broadcast and
interval.		point-to-point)
		120 seconds (NBMA and
		point-to-multipoint)
Configures OSPF interface hello	ip ospf interface hello-interval	10 seconds (broadcast and
interval.		point-to-point)
		30 seconds (NBMA and point-
		to-multipoint)
Configures the OSPF interface cost.	ip ospf interface cost	1
Configures the OSPF poll interval.	ip ospf interface poll-interval	120 seconds
Configures the OSPF interface pri-	ip ospf interface priority	1
ority.
Configures OSPF interface retrans-	ip ospf interface retrans-interval	5 seconds
mit interval.
Configures the OSPF interface tran-	ip ospf interface transit-delay	1 second
sit delay.
Configures the OSPF interface type.	ip ospf interface type	broadcast
Configures graceful restart on	ip ospf restart-support	Disabled
redundant switches in a stack

OmniSwitch 6600 Family Advanced Routing Configuration Guide March 2005 page 1-3