Alcatel Carrier Internetworking Solutions 060187-10 REV D manual Related Documentation

Page 9

About This Guide	Related Documentation

Related Documentation

The following are the titles and descriptions of all the OmniSwitch 6600 Family user manuals:

•OmniSwitch 6600 Family Getting Started Guide

Describes the hardware and software procedures for getting an OmniSwitch 6600 Family switch up and running. Also provides information on fundamental aspects of OmniSwitch software and stacking architecture.

•OmniSwitch 6600 Family Hardware Users Guide

Complete technical specifications and procedures for all OmniSwitch 6600 Family chassis, power supplies, fans, and uplink and stacking modules.

•OmniSwitch CLI Reference Guide

Complete reference to all CLI commands supported on the OmniSwitch 6600, 6800, 7700, 7800, and 8800. Includes syntax definitions, default values, examples, usage guidelines, and CLI-to-MIB vari- able mappings.

•OmniSwitch 6600 Family Switch Management Guide

Includes procedures for readying an individual switch for integration into a network. Topics include the software directory architecture, image rollback protections, authenticated switch access, managing switch files, system configuration, using SNMP, and using web management software (WebView).

•OmniSwitch 6600 Family Network Configuration Guide

Includes network configuration procedures and descriptive information on all the major software features and protocols included in the base software package. Chapters cover Layer 2 information (Ethernet and VLAN configuration), Layer 3 information, security options (authenticated VLANs), Quality of Service (QoS), and link aggregation.

•OmniSwitch 6600 Family Advanced Routing Configuration Guide

Includes network configuration procedures and descriptive information on all the software features and protocols included in the advanced routing software package OSPF.

•Technical Tips, Field Notices

Includes information published by Alcatel’s Customer Support group.

•Release Note

Includes critical Open Problem Reports, feature exceptions, and other important information on the features supported in the current release and any limitations to their support.

OmniSwitch 6600 Family Advanced Routing Configuration Guide March 2005

page ix

Image 9

Contents OmniSwitch 6600 Family Advanced Routing Configuration Guide Page Contents Alcatel INTERNETWORKING, INC. AII Unsupported Platforms Supported PlatformsWhat is in this Manual? When Should I Read this Manual?What is Not in this Manual? Who Should Read this Manual?Stage 1 Using the Switch for the First Time How is the Information Organized?Documentation Roadmap Stage 2 Gaining Familiarity with Basic Switch Functions Stage 3 Integrating the Switch Into a NetworkAnytime Related Documentation OmniSwitch 6600 Family Getting Started GuideTechnical Support This Chapter Configuring OspfOspf Specifications Parameter Description Command Default Value/Comments Ospf Defaults TableOspf Quick Steps Router ID Admin Status = Enabled Admin Status = Enabled Operational Status = UpShow ip ospf area Area Identifier Area Type = normalOspf Hello Protocol Ospf OverviewOspf Intra-Area and Inter-Area Routing Ospf AreasClassification of Routers Ospf Routers Connected with a Virtual Link Virtual LinksOspf Stub Area Stub AreasTotally Stubby Area Example Not-So-Stubby-AreasEqual Cost Multi-Path Ecmp Routing Graceful Restart on Stacks with Redundant SwitchesNon Broadcast Ospf Routing Multiple Equal Cost PathsOspf Graceful Restart Helping and Restarting Router Example Configuring Ospf Preparing the Network for Ospf Loading the Software Activating OspfEnabling Ospf Removing Ospf from MemoryCreating an Area Creating an Ospf AreaEnabling an Area Specifying an Area TypeEnabling and Disabling Summarization Displaying Area StatusDeleting an Area Setting Area Ranges Configuring Stub Area Default MetricsConfiguring a Totally Stubby Area No ip ospf area 1.1.1.1 default-metricEnter the following commands on Router B Creating an Interface Creating Ospf InterfacesAssigning an Interface to an Area Activating an InterfaceInterface Authentication Simple AuthenticationMD5 Encryption Ip ospf interface 120.5.80.1 dead-interval 50 cost Modifying Interface ParametersIp ospf interface 120.5.80.1 hello-interval Ip ospf interface 120.5.80.1 dead-intervalCreating Virtual Links Creating a Virtual LinkModifying Virtual Link Parameters Creating Redistribution Policies and Filters Specifying an Autonomous System Boundary RouterEnabling Redistribution Creating a Redistribution Filter Creating a Redistribution PolicyShow ip ospf redist-filter rip Show ip ospf redist-filterShow ip ospf redist-filter rip 1.1.0.0 No ip ospf redist-filter rip 1.1.0.0Configuring Router Capabilities Configuring Static Neighbors Ip ospf interface 1.1.1.1 type non-broadcastIp ospf neighbor 1.1.1.8 eligible No ip ospf restart-support Ip ospf restart-support planned-onlyThree Area Ospf Network Ospf Application ExamplePrepare the Routers Ospf Application ExampleConfiguring Ospf Router Enable OspfOspf Application Example Examine the Network Verifying Ospf Configuration Alcatel License Agreement Software License and Copyright StatementsAlcatel License Agreement Software License and Copyright Statements Booting and Debugging Non-Proprietary Software Third Party Licenses and NoticesOpenLDAP Public License Version 2.4, 8 December Linux GNU General Public License Version 2, JunePreamble Third Party Licenses and Notices Software License and Copyright Statements Third Party Licenses and Notices Appendix How to Apply These Terms to Your New Programs University of California Carnegie-Mellon UniversityRandom.c Agranat Apptitude, IncRSA Security Inc Sun Microsystems, IncNetwork Time Protocol Version Wind River Systems, IncIndex Index