3Com WL-455 manual Power Requirements, Safety Information

Page 18

„To access and use the Web configuration management system, you need a computer that is running Internet Explorer 5.0 or newer and one of the following operating systems: Windows 98, Windows ME, Windows NT 4.0 Service Pack 6, Windows 2000, or Windows XP. It is recommended that this computer become the dedicated workstation for managing and configuring the access point and the wireless network.

POWER REQUIREMENTS

The access point complies with the IEEE 802.3af power-over-Ethernet standard. It receives power over standard category 5 straight (8-wire) Ethernet cable. Installation requires the use of either the 3Com power supply provided or

IEEE 802.3af compliant power supply equipment (output power rated 48 V dc @ 350 mA maximum). Such equipment must be safety certified according to UL, CSA, IEC or other applicable national or international safety requirements for the country of use. All references to the power supply in this document refer to equipment that meets these requirements.

Because the power supply plug is the only means of disconnecting the access point from power, make sure the power outlet is accessible.

See “Using an Optional Power-Over Ethernet Injector” on page 17 and “Using a Power-Over-Ethernet LAN Port” on page 18.

Note for use of the 3Com power supply (part number 61-0107-000) in Norway: This product is also designed for use on an IT power system with phase-to-phase voltage of 230 V.

SAFETY INFORMATION

This equipment must be installed in compliance with local and national building codes, regulatory restrictions, and FCC rules. For the safety of people and equipment, only professional network personnel should install the access point, cables, and antennas.

CAUTION: If you supply your own Ethernet cable for connecting power, be sure

!that it is category 5 straight-through (8-wire) cable that has not been altered in any way. Use of nonstandard cable could damage the access point.

CAUTION: To comply with FCC radio frequency (RF) exposure limits, a minimum

!body-to-antenna distance of 1 meter (3 feet) must be maintained when the access point is operational.

12

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Wireless LAN Access Point Campus Drive Contents System Configuration Troubleshooting Regulatory Compliance Information Index Page Product Features SecurityPerformance and Reliability „ HTTP/HTTPSWDS Bridging and Spanning Tree Protocol STP Support 802.11G Wireless Network Standard ManageabilityStandard Network Configuration and Planning AD HOC Wireless LANInfrastructure Wireless LAN Infrastructure Wireless LAN for Roaming Wireless PCS Advanced Network Configuration and Planning PUBLIC/PRIVATE Access Point ServiceTerminology Page Page Installing the Access Point Installation RequirementsPower Requirements Safety InformationDeciding Where to Place Equipment Performing a Site Survey Before YOU Begin Connecting the Standard Antennas Connecting Power Using the Included AC AdapterUsing AN Optional POWER-OVER Ethernet Injector Using a POWER-OVER-ETHERNET LAN Port Checking the LedsMounting on a Wall Plastic anchors and 3 screws Flat Surface Installation Selecting and Connecting a Different Antenna Model Power Settings on the Access Point for External Antennas USAInstalling Software Utilities European CommunityPage Using the 3COM Wireless Device Manager Launching a Wireless Device ConfigurationClick Configure Configuration Login Setting the Country CodeUsing the PRE-IP Configuration Wizard Basic Setup Advanced Setup IdentificationDhcp Client WEB Servers Smart MonitorRadius Page Authentication „ 802.1x Supplicant Setup ParameterDescription Filter Control Filtering by VlanEnabling Vlan Filtering Client List Timeout Security FiltersUplink Port MAC Address Filtering Filtering by Ethernet Protocol Type Snmp Trap Configuration Trap Description When the Trap is SentSnmp Users Dot1xMacAddrAuthSuccessGroups Snmp Targets Snmp FilterAdministration WDS/STP Settings Configuration Guidelines Radio Bridge RolesBridge Address Entry Configuring Spanning Tree Protocol Settings Scanning for WDS LinksLink Configuration System LOGStatus Enabling Virtual Access Point VAP Radio SettingsVirtual Access Point VAP Configuration Radio InterfacePage Changing Radio Settings Page Configuring Encryption Selecting a Virtual Access Point VAPConfiguring Authentication SecurityWPA Configuration WEP Configuration HOW to Setup the Access Point for Radius Authentication Select Advanced SetupSelect Advanced Setup HOW to Setup the Access Point for WPA with PRE-SHAREDPSK KEYWPA Configuration for Windows XP WPA-PSK Tkip Page Troubleshooting SymptomSolutions Access point that you are configuring and you change Page Regulatory Compliance Information Industry Canada Emissions Compliance Statement EU Compliance Grundlegenden Anforderungen und den anderen EU Restrictions for Use in the 2.4GHz band Page Index Page TCP/IP
Related manuals
Manual 66 pages 59.59 Kb

WL-455 specifications

The 3Com WL-455 is a versatile wireless access point designed to meet the needs of small to medium-sized enterprises. Renowned for its robust performance, this device is a critical component for businesses looking to enhance their wireless network capabilities.

One of the standout features of the WL-455 is its ability to support both 802.11b and 802.11g wireless standards. This dual compatibility allows organizations to maintain connectivity with a broad range of devices, ensuring high-speed internet access while reducing the risk of obsolescence as new technologies emerge. The WL-455 supports data rates of up to 54 Mbps, providing sufficient bandwidth for most applications utilized in a business environment.

Security is paramount in today's digital world, and the WL-455 excels in this area. It offers advanced security features including WEP, WPA, and WPA2 encryption protocols, offering multiple layers of protection for sensitive data transmitted over the wireless network. This ensures that employees can connect to the network securely, minimizing the risks posed by potential threats.

In terms of management and installation, the 3Com WL-455 is designed for ease of use. It includes a streamlined web-based interface, which simplifies the process of configuring network settings. Additionally, the device supports Power over Ethernet (PoE), enabling network administrators to deploy the access point without needing external power sources, reducing cabling clutter and simplifying setups.

The WL-455 is also equipped with a feature called Quality of Service (QoS), which prioritizes network traffic to ensure that critical applications receive the necessary bandwidth during peak usage times. This is particularly important for businesses that rely on real-time applications, such as VoIP or video conferencing, where latency and packet loss can severely impact performance.

With a sleek and compact design, the 3Com WL-455 can be easily mounted on ceilings or walls, allowing for flexible placement options within any office environment. Its durable construction ensures that it can withstand the rigors of daily use while maintaining optimal performance.

Overall, the 3Com WL-455 is a powerful solution for organizations aiming to implement a reliable and secure wireless network. With its range of features, user-friendly management tools, and robust security measures, it emerges as an excellent choice for businesses looking to improve their connectivity and efficiency in an increasingly wireless world.
Top Page Image Contents