3Com WL-455 manual Snmp Users, Dot1xMacAddrAuthSuccess

Page 47

Trap	Description (When the Trap is Sent)

dot1xMacAddrAuthSuccess	Sent when a station successfully authenticates the
	MAC address with the RADIUS server. The trap also
	includes the MAC address of the station that has
	authenticated.

dot1xMacAddrAuthFail	Sent when a station fails to authenticate the MAC
	address with the RADIUS server. The trap also
	includes the MAC address of the station that failed
	to authenticate.

dot1xAuthNotInitiated	Sent when a station did not initiate 802.1x
	authentication with the RADIUS server. The trap
	also includes the MAC address of the station that
	failed to authenticate.

dot1xAuthSuccess	Sent when a station successfully authenticates with
	the RADIUS server. The trap also includes the MAC
	address of the station that has authenticated.

localMacAddrAuthSuccess	Sent when a station successfully authenticates the
	MAC address with the database stored locally
	within the access point. The trap also includes the
	MAC address of the station that has authenticated.

localMacAddrAuthFail	Sent when a station fails to authenticate the MAC
	address with the database s stored locally within the
	access point. The trap also includes the MAC
	address of the station that failed to authenticate.

sntpServerFail	Sent when the access point fails to get time from
	the configured SNTP server.

SNMP USERS

Security configuration is accomplished by managing groups and users. There are three default groups that correspond to three available security levels:

Default Groups

RO (read-only) group

RW Auth (read-write) group

RWPriv (read-write) group

Default Security Levels

NoAuthNoPriv (no authentication no privacy)

AuthNoPriv (authentication, but no privacy)

AuthPriv (both authentication and privacy)

41

Image 47

Contents

Wireless LAN Access Point Campus Drive Contents System Configuration Troubleshooting Regulatory Compliance Information Index Page Security Product Features„ HTTP/HTTPS Performance and ReliabilityWDS Bridging and Spanning Tree Protocol STP Support Manageability 802.11G Wireless Network StandardInfrastructure Wireless LAN Standard Network Configuration and PlanningAD HOC Wireless LAN Infrastructure Wireless LAN for Roaming Wireless PCS PUBLIC/PRIVATE Access Point Service Advanced Network Configuration and PlanningTerminology Page Page Installation Requirements Installing the Access PointSafety Information Power RequirementsDeciding Where to Place Equipment Performing a Site Survey Before YOU Begin Connecting the Standard Antennas Using the Included AC Adapter Connecting PowerUsing AN Optional POWER-OVER Ethernet Injector Mounting on a Wall Using a POWER-OVER-ETHERNET LAN PortChecking the Leds Plastic anchors and 3 screws Flat Surface Installation Selecting and Connecting a Different Antenna Model USA Power Settings on the Access Point for External AntennasEuropean Community Installing Software UtilitiesPage Launching a Wireless Device Configuration Using the 3COM Wireless Device ManagerClick Configure Using the PRE-IP Configuration Wizard Configuration LoginSetting the Country Code Basic Setup Dhcp Client Advanced SetupIdentification Smart Monitor WEB ServersRadius Page Authentication „ 802.1x Supplicant Setup ParameterDescription Enabling Vlan Filtering Filter ControlFiltering by Vlan Uplink Port MAC Address Filtering Client List Timeout Security Filters Filtering by Ethernet Protocol Type Snmp Trap Description When the Trap is Sent Trap ConfigurationDot1xMacAddrAuthSuccess Snmp UsersGroups Snmp Filter Snmp TargetsAdministration WDS/STP Settings Bridge Address Entry Configuration GuidelinesRadio Bridge Roles Scanning for WDS Links Configuring Spanning Tree Protocol SettingsSystem LOG Link ConfigurationStatus Radio Interface Radio SettingsVirtual Access Point VAP Configuration Enabling Virtual Access Point VAPPage Changing Radio Settings Page Security Selecting a Virtual Access Point VAPConfiguring Authentication Configuring EncryptionWPA Configuration WEP Configuration Select Advanced Setup HOW to Setup the Access Point for Radius AuthenticationSelect Advanced Setup PRE-SHAREDPSK KEY HOW to Setup the Access Point for WPA withWPA Configuration for Windows XP WPA-PSK Tkip Page Troubleshooting SymptomSolutions Access point that you are configuring and you change Page Regulatory Compliance Information Industry Canada Emissions Compliance Statement EU Compliance Grundlegenden Anforderungen und den anderen EU Restrictions for Use in the 2.4GHz band Page Index Page TCP/IP