3Com WL-455 manual Authentication

Page 39

AUTHENTICATION

The Authentication page allows you to configure the type of upper-layer authentication the access point uses for wireless clients. This authentication setup is applicable for both radio interfaces. Access is checked against the MAC Address authentication database stored on the access point.

NOTE: This level of authentication occurs BEFORE any 802.1x authentication configured on the Security page. When using Local and RADIUS MAC Authentication, clients attempting to authenticate to the access point MUST pass these settings before any subsequent 802.1x authentication is attempted and verified. If no MAC address filtering is desired, leave this set to the default setting of Disable.

Configure the options as described below. When you are finished, click Apply.

„MAC Authentication— Selecting MAC authentication allows you to define access permission and precedence. Options are:

„Local MAC— With this option, the MAC address of the associating station is compared against the local access control list. You must build this list (called the MAC Authentication Table) as described in Local MAC Authentication below. Use this option if you want to restrict wireless clients authentication to the access point based off their MAC address.

„RADIUS MAC— With this option, the MAC address of the associating station is sent to the configured RADIUS server for validation. You must specify the authentication sequence and the corresponding parameters for the remote authentication protocol. See “RADIUS” on page 31 and “802.1x Wireless Setup” below.

„Disable— No MAC address related checks are performed on a client requesting authentication to the access point.

„802.1x Wireless Setup—802.1x is designed to enhance the security management of the wireless network. Select one of the following options:

„Disable— The access point will neither initiate nor respond to any 802.1x authentication requests to or from wireless clients.

„Supported — Legacy clients (non 802.1x) and 802.1x clients are both supported. This is provided for ease of migration. This option works with WPA key management set to either “WPA authentication over 802.1x” or “WPA pre-shared key (PSK)” on the radio security page.

33

Image 39
Contents Wireless LAN Access Point Campus Drive Contents System Configuration Troubleshooting Regulatory Compliance Information Index Page Security Product Features„ HTTP/HTTPS Performance and ReliabilityWDS Bridging and Spanning Tree Protocol STP Support Manageability 802.11G Wireless Network StandardStandard Network Configuration and Planning AD HOC Wireless LANInfrastructure Wireless LAN Infrastructure Wireless LAN for Roaming Wireless PCS PUBLIC/PRIVATE Access Point Service Advanced Network Configuration and PlanningTerminology Page Page Installation Requirements Installing the Access PointSafety Information Power RequirementsDeciding Where to Place Equipment Performing a Site Survey Before YOU Begin Connecting the Standard Antennas Using the Included AC Adapter Connecting PowerUsing AN Optional POWER-OVER Ethernet Injector Using a POWER-OVER-ETHERNET LAN Port Checking the LedsMounting on a Wall Plastic anchors and 3 screws Flat Surface Installation Selecting and Connecting a Different Antenna Model USA Power Settings on the Access Point for External AntennasEuropean Community Installing Software UtilitiesPage Launching a Wireless Device Configuration Using the 3COM Wireless Device ManagerClick Configure Configuration Login Setting the Country CodeUsing the PRE-IP Configuration Wizard Basic Setup Advanced Setup IdentificationDhcp Client Smart Monitor WEB ServersRadius Page Authentication „ 802.1x Supplicant Setup ParameterDescription Filter Control Filtering by VlanEnabling Vlan Filtering Client List Timeout Security FiltersUplink Port MAC Address Filtering Filtering by Ethernet Protocol Type Snmp Trap Description When the Trap is Sent Trap ConfigurationDot1xMacAddrAuthSuccess Snmp UsersGroups Snmp Filter Snmp TargetsAdministration WDS/STP Settings Configuration Guidelines Radio Bridge RolesBridge Address Entry Scanning for WDS Links Configuring Spanning Tree Protocol SettingsSystem LOG Link ConfigurationStatus Radio Interface Radio SettingsVirtual Access Point VAP Configuration Enabling Virtual Access Point VAPPage Changing Radio Settings Page Security Selecting a Virtual Access Point VAPConfiguring Authentication Configuring EncryptionWPA Configuration WEP Configuration Select Advanced Setup HOW to Setup the Access Point for Radius AuthenticationSelect Advanced Setup PRE-SHAREDPSK KEY HOW to Setup the Access Point for WPA withWPA Configuration for Windows XP WPA-PSK Tkip Page Troubleshooting SymptomSolutions Access point that you are configuring and you change Page Regulatory Compliance Information Industry Canada Emissions Compliance Statement EU Compliance Grundlegenden Anforderungen und den anderen EU Restrictions for Use in the 2.4GHz band Page Index Page TCP/IP
Related manuals
Manual 66 pages 59.59 Kb

WL-455 specifications

The 3Com WL-455 is a versatile wireless access point designed to meet the needs of small to medium-sized enterprises. Renowned for its robust performance, this device is a critical component for businesses looking to enhance their wireless network capabilities.

One of the standout features of the WL-455 is its ability to support both 802.11b and 802.11g wireless standards. This dual compatibility allows organizations to maintain connectivity with a broad range of devices, ensuring high-speed internet access while reducing the risk of obsolescence as new technologies emerge. The WL-455 supports data rates of up to 54 Mbps, providing sufficient bandwidth for most applications utilized in a business environment.

Security is paramount in today's digital world, and the WL-455 excels in this area. It offers advanced security features including WEP, WPA, and WPA2 encryption protocols, offering multiple layers of protection for sensitive data transmitted over the wireless network. This ensures that employees can connect to the network securely, minimizing the risks posed by potential threats.

In terms of management and installation, the 3Com WL-455 is designed for ease of use. It includes a streamlined web-based interface, which simplifies the process of configuring network settings. Additionally, the device supports Power over Ethernet (PoE), enabling network administrators to deploy the access point without needing external power sources, reducing cabling clutter and simplifying setups.

The WL-455 is also equipped with a feature called Quality of Service (QoS), which prioritizes network traffic to ensure that critical applications receive the necessary bandwidth during peak usage times. This is particularly important for businesses that rely on real-time applications, such as VoIP or video conferencing, where latency and packet loss can severely impact performance.

With a sleek and compact design, the 3Com WL-455 can be easily mounted on ceilings or walls, allowing for flexible placement options within any office environment. Its durable construction ensures that it can withstand the rigors of daily use while maintaining optimal performance.

Overall, the 3Com WL-455 is a powerful solution for organizations aiming to implement a reliable and secure wireless network. With its range of features, user-friendly management tools, and robust security measures, it emerges as an excellent choice for businesses looking to improve their connectivity and efficiency in an increasingly wireless world.