3Com WL-455 manual Changing Radio Settings

Page 58

CHANGING RADIO SETTINGS

To change radio settings on a VAP, select a VAP from the list to display its current configuration.

When you are finished configuring items on this page, click Apply.

„Country Code—Displays the country where this access point is installed and running.

„

„

Description—Enter a description for this access point.

Turbo Mode (802.11g and 802.11a only)—Turbo Mode is an enhanced wireless LAN operating mode that can provide a higher data rate.

In normal mode the channel bandwidth is 20 MHz. In Turbo Mode the channel bandwidth is increased to 40 MHz. However, only a limited number of channels are available when Turbo Mode is enabled.

„Auto Channel Select (802.11g only)—SelectAuto Channel Select Enable to allow the access point to select a radio channel automatically.

„Radio Channel—From the pull-down list, select the radio channel over which the access point communicates to computers in its BSS. Available channel settings are limited by local regulations that determine which channels are allowed. The client channel for wireless users is automatically set to that used by the access point to which they are linked.

When multiple access points are deployed in the same area, be sure to choose channels separated by at least five channels to avoid channel interference. You can deploy up to three access points in the same area; for example, Ch1, Ch6, and Ch11.

„Output Antenna—Select the antenna to use on the access point. The access point has two antenna connectors for each radio. For the 802.11g radio, the A antenna is near the Ethernet connector and the B antenna is near the LEDs.

„Transmission Power (802.11g only)—Set the signal strength transmitted from the access point. The longer the transmission distance, the higher the transmission power required. (Default: 100%)

„Maximum Transmit Data Rate—Select the appropriate data rate from the drop-down list for the data transfer speed running on your network. (802.11b default: 11 Mbps.) In order to reach all clients, this rate should be set lower (for example, 1 or 2 Mbps on an 802.11b radio). To isolate clients that are unable to connect at higher rates, set this value higher.

52

Page 57 Page 59
Image 58
Page 57 Page 59
Contents Wireless LAN Access Point Campus Drive Contents System Configuration Troubleshooting Regulatory Compliance Information Index Page Product Features SecurityPerformance and Reliability „ HTTP/HTTPSWDS Bridging and Spanning Tree Protocol STP Support 802.11G Wireless Network Standard ManageabilityAD HOC Wireless LAN Standard Network Configuration and PlanningInfrastructure Wireless LAN Infrastructure Wireless LAN for Roaming Wireless PCS Advanced Network Configuration and Planning PUBLIC/PRIVATE Access Point ServiceTerminology Page Page Installing the Access Point Installation RequirementsPower Requirements Safety InformationDeciding Where to Place Equipment Performing a Site Survey Before YOU Begin Connecting the Standard Antennas Connecting Power Using the Included AC AdapterUsing AN Optional POWER-OVER Ethernet Injector Checking the Leds Using a POWER-OVER-ETHERNET LAN PortMounting on a Wall Plastic anchors and 3 screws Flat Surface Installation Selecting and Connecting a Different Antenna Model Power Settings on the Access Point for External Antennas USAInstalling Software Utilities European CommunityPage Using the 3COM Wireless Device Manager Launching a Wireless Device ConfigurationClick Configure Setting the Country Code Configuration LoginUsing the PRE-IP Configuration Wizard Basic Setup Identification Advanced SetupDhcp Client WEB Servers Smart MonitorRadius Page Authentication „ 802.1x Supplicant Setup ParameterDescription Filtering by Vlan Filter ControlEnabling Vlan Filtering Security Filters Client List TimeoutUplink Port MAC Address Filtering Filtering by Ethernet Protocol Type Snmp Trap Configuration Trap Description When the Trap is SentSnmp Users Dot1xMacAddrAuthSuccessGroups Snmp Targets Snmp FilterAdministration WDS/STP Settings Radio Bridge Roles Configuration GuidelinesBridge Address Entry Configuring Spanning Tree Protocol Settings Scanning for WDS LinksLink Configuration System LOGStatus Enabling Virtual Access Point VAP Radio SettingsVirtual Access Point VAP Configuration Radio InterfacePage Changing Radio Settings Page Configuring Encryption Selecting a Virtual Access Point VAPConfiguring Authentication SecurityWPA Configuration WEP Configuration HOW to Setup the Access Point for Radius Authentication Select Advanced SetupSelect Advanced Setup HOW to Setup the Access Point for WPA with PRE-SHAREDPSK KEYWPA Configuration for Windows XP WPA-PSK Tkip Page Troubleshooting SymptomSolutions Access point that you are configuring and you change Page Regulatory Compliance Information Industry Canada Emissions Compliance Statement EU Compliance Grundlegenden Anforderungen und den anderen EU Restrictions for Use in the 2.4GHz band Page Index Page TCP/IP
Related manuals
Manual 66 pages 59.59 Kb

WL-455 specifications

The 3Com WL-455 is a versatile wireless access point designed to meet the needs of small to medium-sized enterprises. Renowned for its robust performance, this device is a critical component for businesses looking to enhance their wireless network capabilities.

One of the standout features of the WL-455 is its ability to support both 802.11b and 802.11g wireless standards. This dual compatibility allows organizations to maintain connectivity with a broad range of devices, ensuring high-speed internet access while reducing the risk of obsolescence as new technologies emerge. The WL-455 supports data rates of up to 54 Mbps, providing sufficient bandwidth for most applications utilized in a business environment.

Security is paramount in today's digital world, and the WL-455 excels in this area. It offers advanced security features including WEP, WPA, and WPA2 encryption protocols, offering multiple layers of protection for sensitive data transmitted over the wireless network. This ensures that employees can connect to the network securely, minimizing the risks posed by potential threats.

In terms of management and installation, the 3Com WL-455 is designed for ease of use. It includes a streamlined web-based interface, which simplifies the process of configuring network settings. Additionally, the device supports Power over Ethernet (PoE), enabling network administrators to deploy the access point without needing external power sources, reducing cabling clutter and simplifying setups.

The WL-455 is also equipped with a feature called Quality of Service (QoS), which prioritizes network traffic to ensure that critical applications receive the necessary bandwidth during peak usage times. This is particularly important for businesses that rely on real-time applications, such as VoIP or video conferencing, where latency and packet loss can severely impact performance.

With a sleek and compact design, the 3Com WL-455 can be easily mounted on ceilings or walls, allowing for flexible placement options within any office environment. Its durable construction ensures that it can withstand the rigors of daily use while maintaining optimal performance.

Overall, the 3Com WL-455 is a powerful solution for organizations aiming to implement a reliable and secure wireless network. With its range of features, user-friendly management tools, and robust security measures, it emerges as an excellent choice for businesses looking to improve their connectivity and efficiency in an increasingly wireless world.
Top Page Image Contents