Olympus WS-813 Setting the time and date Time & Date, Press the + or − button to change the value

Setting the time and date [Time & Date]

If you set the time and date before using the recorder, recording time and date information is automatically stored for each file. Setting the time and date beforehand enables easier file management.

When you use the recorder for the first time, or when the battery is inserted after the recorder has not been used for a long time, [Set time

&date] will appear. When “Hour” is flashing, conduct setup from Step 1.

+ − button 90button `OK button

1Press the 9or 0button to select the item you want to set.

•Select “Hour”, “Minute”, “Year”, “Month” or “Day” by moving the flashing position.

2Press the + or − button to change the value.

•Follow the same steps by pressing the 9or 0button to select the next item, and pressing the + or − button to change the value.

•You can select between 12 and 24

hour display by pressing the LIST		1
button while setting the hour and
minute.	22:38	Setting
10:38 PM
Example: 10:38 P.M
(Initial setting)		the
• You can select the order of “Month”,
		time
“Day” and “Year” by pressing the
LIST button while setting these items.		and
Example: March 24, 2012
3M 24D 2012Y		date
(Initial setting)
24D 3M 2012Y

2012Y 3M 24D

3Press the `OK button to complete the setting.

•The clock will start from the set date and time. Press the `OK button when you want the clock to start.

Note
• If you press the `OK button during the
setup operation, the recorder will save	EN
the items that were set to that point.

21