Initial Operation
Initial operation
Insert batteries or rechargeable batteries
►Open the rechargeable/battery compartment and insert the rechargeable battery pack 466* or batteries (Typ Micro / AAA, 2 x 1.5 V). Make sure the polarity is correct.
Rechargeable battery sensor contact
Battery/rechargeable battery compartment
Charging of Rechargeable Batteries
warning
Danger of explosion and burns!
■Recharge the batteries only in the dictation machine.
■Do not use damaged batteries.
■Insert the plug of the power supply only into power sockets
which provide the line voltage specified on the rating label. Oth- erwise there is a danger of fire, explosion and overheating.
Disregarding these precautions means risking explosions and burns.
►After switching off the Digta 420, connect the power supply 475* to the
–Shortly afterwards, the load indicator will appear on the dis- play, and the
–The rechargeable battery is fully charged after ca. 4 hours. The load indicator will disappear, and the
►Unplug the mains supply from the wall socket, and pull the USB- socket of the mains supply cable out of the »PC/USB« socket.
►The symbol » 
« will start flashing when the batteries or the rechargeable batteries are low.
iThe operating with batteries, mains unit 475*, rechargeable battery 466* and the charging of a rechargeable battery in the Digta Station* is described in the detailed user’s manual. You will find this manual in the „Docu” directory on the included CD.
*Extra equipment
12