This operating manual contains important instructions for safe and efficient handling of the Grundig Business Systems Digta 420 (hereinafter referred to as “device”). This operating man- ual is part of the device and must be kept accessible in the imme- diate vicinity of the device for persons working on and with the device. Carefully read and make sure you understand this operat- ing manual and all product safety labels prior to starting any work with the device. The basic prerequisite for safe work is compliance with all specified safety and handling instructions. In addition, all local accident prevention guidelines and general safety regulations effective at the implementation site of the device apply. Illustrations in this operating manual are provided for basic understanding and can vary from the actual model of the device. No claims can be derived from the illustrations in this operating manual.
Disclaimer
All information and instructions in this operating manual have been provided under due consideration of applicable guidelines and reg- ulations, the current and known state of the art, as well as our many years of
■Failure to comply with the instructions in this operating manual
■Improper use / misuse
■Willful operation by
■Unauthorized conversions or
■Use of
The originator is solely liable to the full extent for damages caused by such conduct. The agreed upon obligations in the delivery con- tract, the general terms and conditions, the manufacturer’s delivery conditions, and the statutory regulations valid at the time the con- tract was concluded, apply.
Copyright
This operating manual is protected by copyright. No part of this operating manual may be reproduced in any form or incorporat- ed into any information retrieval system without written permis- sion of Grundig Business Systems GmbH (“the manufacturer”).
Delivery of the operating manual to third parties, duplication in any form - including excerpts - as well as exploitation and/or communi- cation of the content, are not permitted without a written declara- tion of release from the manufacturer. Actions to the contrary make damage compensation mandatory. We reserve the right to enforce additional claims.
The manufacturer
© Grundig Business Systems GmbH Weiherstraße 10