English
Operating the Recorder
Split
Select a recording to edit and then press and hold 
to enter Edit mode. The LCD will display “EDT”.
1.Press 
to advance to the time point at which you want to split the recording. Press and hold 
or 
to skip backwards or forwards in 30 second increments.
2.Press 
when the desired time point has been reached. The recording will pause.
3.Press 
to confirm the edit. The LCD will display “EDT OK”. The recording has now been split into two.
The first section is saved as the original record- ing number. The second section is saved as the last recording number.
You may press 
to cancel at any time.
Remove a Section
Select a recording to edit and then press and hold 
to enter Edit mode. The LCD will display “EDT”.
1.Press 
to advance to the time point of the section you want to remove. Press and hold 
or 
to skip backwards or forwards in 30 second increments.
2.Press 
when the desired starting time point has been reached. The LCD will display “AST”. This marks the start point of the section to be removed
Page 16 | Coby Electronics Corporation |
|
|