English
Setup Options
Microphone Record Sensitivity
If the recorder is in Time mode, press 
to enter Standby mode.
1.Press and hold 
to enter Setup mode (the LCD should read “SET”).
2.Press 
once. The LCD will display “SET mic: HI” or “SET mic:LO”.
3.Press 
or 
to change the setting between “HI” and “LO”.
Use the “LO” setting to record sounds that are very close to the microphone. Use the “HI” setting to record sounds that are further away from the microphone.
4.When all settings have been completed, press 
to return to Standby mode.
Voice-Activated Recording (VAS)
If the recorder is in Time mode, press 
to enter Standby mode.
1.Press and hold 
to enter Setup mode (the LCD should read “SET”).
2.Press 
twice. The LCD will display “SET OFF” and
the VAS indicator [ 
] will appear on screen.
3.Press 
or 
to change the setting between “OFF” and “ON”.
Use the “OFF” setting to record from the micro- phone continuously when recording.
Page 20 | Coby Electronics Corporation |
|
|